EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

Performance of Glass Fiber Composites With Plastic‐Waste Pyrolysis Char as Filler

Jerome Anokwu, Andrew Clark, Natalie Ferry, Levingshan Augusthus‐Nelson

Polymer Composites · 2026-08-20 · 47 (16) · 14769-14787

DOI: 10.1002/pc.71248 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-05-28. Written by Jerome Anokwu and 3 co-authors. Cited 1 times so far (Crossref); 98 references. The full text is freely available (open access, CC BY 4.0). Funded by: Tertiary Education Trust Fund.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Plastic pyrolysis offers circular solutions for mixed plastic waste but leaves a carbonaceous char that is often underutilized. This study evaluates plastic‐waste‐derived pyrolysis char (0–10 wt.%) as a filler in epoxy/E‐glass laminates (GFRP) and quantifies mechanical, thermal, microstructural, and electrical responses. Tensile behavior remained brittle across all systems; Young's modulus rose at 2.5 wt.% while ultimate tensile strength decreased at mid‐loadings and partially recovered at 10 wt.%. Flexural strength increased at 2.5 wt.%, dipped at 5–7.5 wt.%, and rebounded at 10 wt.%. Interlaminar shear strength improved markedly at high loadings (7.5 wt.% and 10 wt.%). Impact strength showed a modest gain at 2.5 wt.% but declined sharply at 5 wt.%. Hardness peaked at 5 wt.%. Fiber volume fraction fell with char, rationalizing strength/stiffness trends. TGA/DTG revealed three‐stage degradation with a single main peak. Four‐point probe tests detected no conduction at 10 wt.% (sub‐percolation). SEM linked property changes to dispersion at low loading (crack deflection) versus agglomeration and interfacial defects at mid/high loading. Overall, low to moderate char levels enhance stiffness and interlaminar shear strength with minimal reduction in mechanical strength, while higher loadings trade toughness for through‐thickness shear resistance.

Funding

  • Tertiary Education Trust Fund

Cite

APA

Anokwu, J., Clark, A., Ferry, N., & Augusthus‐Nelson, L. (2026). Performance of Glass Fiber Composites With Plastic‐Waste Pyrolysis Char as Filler. Polymer Composites, 47(16), 14769-14787. https://doi.org/10.1002/pc.71248

Vancouver

Anokwu J, Clark A, Ferry N, Augusthus‐Nelson L. Performance of Glass Fiber Composites With Plastic‐Waste Pyrolysis Char as Filler. Polymer Composites. 2026;47(16):14769-14787. doi:10.1002/pc.71248

BibTeX
@article{Anokwu2026,
  author = {Anokwu, Jerome and Clark, Andrew and Ferry, Natalie and Augusthus‐Nelson, Levingshan},
  title = {Performance of Glass Fiber Composites With Plastic‐Waste Pyrolysis Char as Filler},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {16},
  pages = {14769--14787},
  doi = {10.1002/pc.71248}
}
Start for free →