EUVIMEDScopri EUVIMED
Crossref

VARTM Fabrication of High‐Performance EMI Shielding Composites From Prefabricated Bamboo Charcoal/Epoxy/Veneer With Synergistic Multilayer‐Porous Architecture

Yuxuan Cao, Xiang Li, Haoran Ye, Bingjie Tian, Ye Qin, Shijie Du, Lin Yang, Suiyi Li, Changlei Xia

Polymer Composites · 2026-07-20 · 47 (14) · 13060-13072

DOI: 10.1002/pc.71144 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-04-27. Written by Yuxuan Cao and 8 co-authors. 57 references. Funded by: Jiangsu Agricultural Science and Technology Innovation Fund.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

The rapid expansion of 5G technology exacerbates electromagnetic interference (EMI) challenges, yet conventional metal‐based shields are limited by high density, cost, and environmental impact. This study presents a sustainable alternative by converting bamboo waste into conductive charcoal (BC) at 1600°C for use in multilayer composites with poplar veneer and E‐51 epoxy, fabricated via a combined spraying, vacuum‐assisted resin transfer molding (VARTM), and hot‐pressing process. This method ensures uniform BC dispersion and strong interfacial bonding, yielding a synergistic multilayer‐porous architecture. The influence of BC content on microstructure, mechanical properties, EMI shielding, water resistance, and thermal conductivity was systematically studied. Increasing BC loading markedly enhanced EMI shielding, with the highest‐loaded composite achieving 64.1 dB total shielding effectiveness while retaining substantial flexural strength (151.1 MPa), stable Shore D hardness (81.5 HD), improved water resistance, and elevated thermal conductivity (0.468 W m −1 K −1 ). The synergistic multilayer‐porous architecture facilitated continuous conductive networks and promoted absorption‐dominated attenuation through internal scattering and interfacial polarization. This work demonstrates a scalable, sustainable route to transform bamboo waste into lightweight, high‐performance, and eco‐friendly EMI shielding composites with promising potential for green electronics and modern construction applications.

Funding

  • Jiangsu Agricultural Science and Technology Innovation Fund

Cite

APA

Cao, Y., Li, X., Ye, H., Tian, B., Qin, Y., Du, S., Yang, L., Li, S., & Xia, C. (2026). VARTM Fabrication of High‐Performance EMI Shielding Composites From Prefabricated Bamboo Charcoal/Epoxy/Veneer With Synergistic Multilayer‐Porous Architecture. Polymer Composites, 47(14), 13060-13072. https://doi.org/10.1002/pc.71144

Vancouver

Cao Y, Li X, Ye H, Tian B, Qin Y, Du S, et al. VARTM Fabrication of High‐Performance EMI Shielding Composites From Prefabricated Bamboo Charcoal/Epoxy/Veneer With Synergistic Multilayer‐Porous Architecture. Polymer Composites. 2026;47(14):13060-13072. doi:10.1002/pc.71144

BibTeX
@article{Cao2026,
  author = {Cao, Yuxuan and Li, Xiang and Ye, Haoran and Tian, Bingjie and Qin, Ye and Du, Shijie and Yang, Lin and Li, Suiyi and Xia, Changlei},
  title = {VARTM Fabrication of High‐Performance EMI Shielding Composites From Prefabricated Bamboo Charcoal/Epoxy/Veneer With Synergistic Multilayer‐Porous Architecture},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {14},
  pages = {13060--13072},
  doi = {10.1002/pc.71144}
}
Start for free →