EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Lightweight Sheet Molding Compound Composites With Enhanced Mechanical Performance via Cellulose Nanocrystal Reinforcement

Kim Anh Pham, Shristi Ghosh, Andrew Geda, Kyriaki Kalaitzidou

Polymer Composites · 2026-06-20 · 47 (12) · 11517-11528

DOI: 10.1002/pc.71039 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-03-23. Written by Kim Anh Pham and 3 co-authors. Cited 1 times so far (Crossref); 25 references. The full text is freely available (open access, CC BY 4.0). Funded by: Renewable Bioproducts Institute.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

The use of cellulose nanocrystals (CNCs) as a sustainable, high‐performance alternative to partially replace calcium carbonate (CaCO 3 ) in polyester sheet molding compound (SMC) composites is investigated. CaCO 3 is a widely used and affordable filler; however, it contributes to high density and compromises the mechanical properties of the composites. It was found that addition of 0.5 wt.% CNCs into the polyester resin on glass fiber‐polyester SMC composite panels resulted in an increase of 22% and 37% of the tensile modulus and flexural strength respectively, with no effect on the tensile strength, flexural modulus and impact energy. Increase of CNC content to 1 wt.% resulted in similar enhancement of the composite properties. Most importantly, it was concluded that composites containing 0.5 wt.% of CNC and only half of CaCO 3 compared to the standard glass fiber/polyester SMC formulations commonly used, exhibited the same tensile, flexural, and impact properties and ~21% lower density. This study highlights the potential of CNCs for advanced lightweight composite solutions.

Funding

  • Renewable Bioproducts Institute

Cite

APA

Pham, K. A., Ghosh, S., Geda, A., & Kalaitzidou, K. (2026). Lightweight Sheet Molding Compound Composites With Enhanced Mechanical Performance via Cellulose Nanocrystal Reinforcement. Polymer Composites, 47(12), 11517-11528. https://doi.org/10.1002/pc.71039

Vancouver

Pham KA, Ghosh S, Geda A, Kalaitzidou K. Lightweight Sheet Molding Compound Composites With Enhanced Mechanical Performance via Cellulose Nanocrystal Reinforcement. Polymer Composites. 2026;47(12):11517-11528. doi:10.1002/pc.71039

BibTeX
@article{Pham2026,
  author = {Pham, Kim Anh and Ghosh, Shristi and Geda, Andrew and Kalaitzidou, Kyriaki},
  title = {Lightweight Sheet Molding Compound Composites With Enhanced Mechanical Performance via Cellulose Nanocrystal Reinforcement},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {12},
  pages = {11517--11528},
  doi = {10.1002/pc.71039}
}
Start for free →