Lightweight Sheet Molding Compound Composites With Enhanced Mechanical Performance via Cellulose Nanocrystal Reinforcement
Polymer Composites · 20.06.2026 · 47 (12) · 11517-11528
DOI: 10.1002/pc.71039 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 23.03.2026. Verfasst von Kim Anh Pham und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Renewable Bioproducts Institute.
Abstract (Originalsprache)
The use of cellulose nanocrystals (CNCs) as a sustainable, high‐performance alternative to partially replace calcium carbonate (CaCO 3 ) in polyester sheet molding compound (SMC) composites is investigated. CaCO 3 is a widely used and affordable filler; however, it contributes to high density and compromises the mechanical properties of the composites. It was found that addition of 0.5 wt.% CNCs into the polyester resin on glass fiber‐polyester SMC composite panels resulted in an increase of 22% and 37% of the tensile modulus and flexural strength respectively, with no effect on the tensile strength, flexural modulus and impact energy. Increase of CNC content to 1 wt.% resulted in similar enhancement of the composite properties. Most importantly, it was concluded that composites containing 0.5 wt.% of CNC and only half of CaCO 3 compared to the standard glass fiber/polyester SMC formulations commonly used, exhibited the same tensile, flexural, and impact properties and ~21% lower density. This study highlights the potential of CNCs for advanced lightweight composite solutions.
Förderung
- Renewable Bioproducts Institute
Zitieren
APA
Pham, K. A., Ghosh, S., Geda, A., & Kalaitzidou, K. (2026). Lightweight Sheet Molding Compound Composites With Enhanced Mechanical Performance via Cellulose Nanocrystal Reinforcement. Polymer Composites, 47(12), 11517-11528. https://doi.org/10.1002/pc.71039
Vancouver
Pham KA, Ghosh S, Geda A, Kalaitzidou K. Lightweight Sheet Molding Compound Composites With Enhanced Mechanical Performance via Cellulose Nanocrystal Reinforcement. Polymer Composites. 2026;47(12):11517-11528. doi:10.1002/pc.71039
BibTeX
@article{Pham2026,
author = {Pham, Kim Anh and Ghosh, Shristi and Geda, Andrew and Kalaitzidou, Kyriaki},
title = {Lightweight Sheet Molding Compound Composites With Enhanced Mechanical Performance via Cellulose Nanocrystal Reinforcement},
journal = {Polymer Composites},
year = {2026},
volume = {47},
number = {12},
pages = {11517--11528},
doi = {10.1002/pc.71039}
}
EUVIMED