EUVIMEDEUVIMED entdecken
Crossref

Recycled Carbon Fibers in Bulk Molding Compounds: Influence of Recovery Route on Mechanical and Economic Performance

Anurag Pisupati, Lydia Bouzidi, Romain Agogué

Polymer Composites · 20.06.2026 · 47 (12) · 10709-10721

DOI: 10.1002/pc.70981 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 10.03.2026. Verfasst von Anurag Pisupati und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: Agence de la transition écologique.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recycling routes influence both the quality of recovered carbon fibers and the environmental and economic value of reusing them. This study examines bulk molding compound composites produced with fibers sourced from post‐industrial waste, pyrolysis, and low temperature solvolysis. Fiber quality was evaluated using microscopy and thermal analysis, and composite performance was measured through tensile, flexural, and shear tests. Post‐industrial waste fibers showed the highest retention of mechanical properties, with flexural strength near 155 MPa, indicating minimal degradation. Pyrolyzed fibers lost tensile strength but still provided reasonable flexural and shear behavior, while solvolyzed fibers showed intermediate performance influenced by surface residues. A techno economic model, combined with a new cost benefit metric and two‐dimensional sensitivity maps, was used to assess how plant capacity and recovery efficiency affect viability. The maps indicate that post‐industrial waste offers stable performance at low cost with immediate environmental gains. Pyrolysis becomes cost effective at moderate production scale, while solvolysis is difficult to justify unless both recovery and plant size are high. Overall, the results demonstrate the environmental and industrial value of high quality recycled fibers and provide a practical basis for selecting sustainable recycling routes.

Förderung

  • Agence de la transition écologique

Zitieren

APA

Pisupati, A., Bouzidi, L., & Agogué, R. (2026). Recycled Carbon Fibers in Bulk Molding Compounds: Influence of Recovery Route on Mechanical and Economic Performance. Polymer Composites, 47(12), 10709-10721. https://doi.org/10.1002/pc.70981

Vancouver

Pisupati A, Bouzidi L, Agogué R. Recycled Carbon Fibers in Bulk Molding Compounds: Influence of Recovery Route on Mechanical and Economic Performance. Polymer Composites. 2026;47(12):10709-10721. doi:10.1002/pc.70981

BibTeX
@article{Pisupati2026,
  author = {Pisupati, Anurag and Bouzidi, Lydia and Agogué, Romain},
  title = {Recycled Carbon Fibers in Bulk Molding Compounds: Influence of Recovery Route on Mechanical and Economic Performance},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {12},
  pages = {10709--10721},
  doi = {10.1002/pc.70981}
}
Kostenlos starten →