EUVIMEDEUVIMED entdecken
Crossref

Development and Characterization of Carbon Fiber/Phenolic/Epoxy Composites With 3D Thermal Conductive Networks for Thermal Management Applications

Yue Wang, Ying Wang, Lixue Xiang, Bo Tang, Shanshan Shi, Yifan Li, Wei Yu, Donghai Lin, Yonghou Xiao, Jin Chen, Tao Jiang, Jinhong Yu und 1 weitere

Polymer Composites · 20.06.2026 · 47 (S2)

DOI: 10.1002/pc.70955 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 05.03.2026. Verfasst von Yue Wang und 12 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 78 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid development continues in areas such as 5G communications, high‐power electronics, and aerospace technology. This progress is creating an increasingly urgent demand for efficient thermal management materials. The construction of three‐dimensional carbon fiber networks serves as an effective method for producing high thermal conductivity composites. In this article, an innovative carbon fiber/phenolic three‐dimensional network skeleton was fabricated using ultrasonic dispersion, vacuum filtration, and hot‐press molding. Subsequently, carbon fiber/phenolic/epoxy (CF/PF/Epoxy) composite was successfully fabricated. It features a three‐dimensional continuous thermal conduction network, formed via vacuum resin infusion and hot‐press molding. The thermal conductivity of the composites was systematically investigated as a function of carbon fiber content. The results indicate that the in‐plane thermal conductivity of the composite reaches 56.19 W/(mK) (22.52 vol% CF), approximately 267.57 times that of epoxy. Microstructural analysis shows that phenolic resin enables carbon fibers to form a low‐density three‐dimensional network, which can efficiently transfer heat. Moreover, finite element simulations of the composites were performed using COMSOL software. The transient heat conduction equation for solids was derived by substituting Fourier's law into the energy conservation equation. Simulations demonstrate that CF/PF/Epoxy composites exhibit superior thermal conductivity. This confirms their excellent thermal management performance. In infrared thermal imaging and LED heat dissipation applications, these composites exhibit efficient heat transfer and uniform temperature distribution. This article provides a new approach for the controllable fabrication of high thermal conductivity composites with strong potential for engineering applications.

Zitieren

APA

Wang, Y., Wang, Y., Xiang, L., Tang, B., Shi, S., Li, Y., Yu, W., Lin, D., Xiao, Y., Chen, J., Jiang, T., Yu, J., & Wu, X. (2026). Development and Characterization of Carbon Fiber/Phenolic/Epoxy Composites With 3D Thermal Conductive Networks for Thermal Management Applications. Polymer Composites, 47(S2). https://doi.org/10.1002/pc.70955

Vancouver

Wang Y, Wang Y, Xiang L, Tang B, Shi S, Li Y, et al. Development and Characterization of Carbon Fiber/Phenolic/Epoxy Composites With 3D Thermal Conductive Networks for Thermal Management Applications. Polymer Composites. 2026;47(S2). doi:10.1002/pc.70955

BibTeX
@article{Wang2026,
  author = {Wang, Yue and Wang, Ying and Xiang, Lixue and Tang, Bo and Shi, Shanshan and Li, Yifan and Yu, Wei and Lin, Donghai and Xiao, Yonghou and Chen, Jin and Jiang, Tao and Yu, Jinhong and Wu, Xinfeng},
  title = {Development and Characterization of Carbon Fiber/Phenolic/Epoxy Composites With 3D Thermal Conductive Networks for Thermal Management Applications},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {S2},
  doi = {10.1002/pc.70955}
}
Kostenlos starten →