EUVIMEDOdkrijte EUVIMED
Crossref

Fabrication and Interlaminar Shear Strength of 3D ‐Printed CCF ‐ PEEK Rotationally Curved Structures

Xudong Ran, Cunyin Xi, Jianshu Wang, Chuyu Liu, Wei Lei, Peng Zhang, Shouzheng Sun, Zhenyu Han

Polymer Composites · 2026-06-10 · 47 (11) · 10225-10240

DOI: 10.1002/pc.70886 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-02-05. Written by Xudong Ran and 7 co-authors. Cited 1 times so far (Crossref); 33 references. Funded by: National Natural Science Foundation of China.

PovzetekBibliografski podatkiCiteRelated studies

Abstract (original language)

Traditional continuous fiber 3D printing technology has primarily focused on the fabrication of planar structures, with relatively insufficient research on curved composite components. To address the key technical challenges in the continuous fiber‐reinforced 3D printing of rotationally curved components, this study conducted systematic research on printing equipment design, path planning methodologies, and interlaminar performance optimization using carbon fiber‐reinforced polyether‐ether‐ketone (CCF/PEEK) prepreg filament. A multi‐degree‐of‐freedom curved‐surface printing system based on a six‐axis robotic arm was developed to overcome the geometric limitations of traditional three‐axis equipment. A cylindrical surface path layering algorithm based on STL models was proposed, achieving full‐process digital manufacturing of curved components. Through orthogonal experiments and response heatmap analysis, it was clarified that printing speed and printing temperature are the key process parameters affecting interlaminar shear strength, with printing speed being the most influential. The optimal parameter combination (printing speed 0.8 mm/s, printing temperature 380°C, mold temperature 160°C, layer thickness 0.2 mm) improved the interlaminar shear strength to 55.36 MPa. Microscopic morphology analysis demonstrated that optimized thermal input conditions effectively enhance the fiber‐resin interfacial bonding quality. This research provides valuable process references for the additive manufacturing of lightweight and high‐strength curved components.

Funding

  • National Natural Science Foundation of China

Cite

APA

Ran, X., Xi, C., Wang, J., Liu, C., Lei, W., Zhang, P., Sun, S., & Han, Z. (2026). Fabrication and Interlaminar Shear Strength of 3D ‐Printed CCF ‐ PEEK Rotationally Curved Structures. Polymer Composites, 47(11), 10225-10240. https://doi.org/10.1002/pc.70886

Vancouver

Ran X, Xi C, Wang J, Liu C, Lei W, Zhang P, et al. Fabrication and Interlaminar Shear Strength of 3D ‐Printed CCF ‐ PEEK Rotationally Curved Structures. Polymer Composites. 2026;47(11):10225-10240. doi:10.1002/pc.70886

BibTeX
@article{Ran2026,
  author = {Ran, Xudong and Xi, Cunyin and Wang, Jianshu and Liu, Chuyu and Lei, Wei and Zhang, Peng and Sun, Shouzheng and Han, Zhenyu},
  title = {Fabrication and Interlaminar Shear Strength of 3D ‐Printed CCF ‐ PEEK Rotationally Curved Structures},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {11},
  pages = {10225--10240},
  doi = {10.1002/pc.70886}
}
Start for free →