Fabrication and Interlaminar Shear Strength of 3D ‐Printed CCF ‐ PEEK Rotationally Curved Structures
Polymer Composites · 10.06.2026 · 47 (11) · 10225-10240
DOI: 10.1002/pc.70886 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 05.02.2026. Verfasst von Xudong Ran und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Traditional continuous fiber 3D printing technology has primarily focused on the fabrication of planar structures, with relatively insufficient research on curved composite components. To address the key technical challenges in the continuous fiber‐reinforced 3D printing of rotationally curved components, this study conducted systematic research on printing equipment design, path planning methodologies, and interlaminar performance optimization using carbon fiber‐reinforced polyether‐ether‐ketone (CCF/PEEK) prepreg filament. A multi‐degree‐of‐freedom curved‐surface printing system based on a six‐axis robotic arm was developed to overcome the geometric limitations of traditional three‐axis equipment. A cylindrical surface path layering algorithm based on STL models was proposed, achieving full‐process digital manufacturing of curved components. Through orthogonal experiments and response heatmap analysis, it was clarified that printing speed and printing temperature are the key process parameters affecting interlaminar shear strength, with printing speed being the most influential. The optimal parameter combination (printing speed 0.8 mm/s, printing temperature 380°C, mold temperature 160°C, layer thickness 0.2 mm) improved the interlaminar shear strength to 55.36 MPa. Microscopic morphology analysis demonstrated that optimized thermal input conditions effectively enhance the fiber‐resin interfacial bonding quality. This research provides valuable process references for the additive manufacturing of lightweight and high‐strength curved components.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Ran, X., Xi, C., Wang, J., Liu, C., Lei, W., Zhang, P., Sun, S., & Han, Z. (2026). Fabrication and Interlaminar Shear Strength of 3D ‐Printed CCF ‐ PEEK Rotationally Curved Structures. Polymer Composites, 47(11), 10225-10240. https://doi.org/10.1002/pc.70886
Vancouver
Ran X, Xi C, Wang J, Liu C, Lei W, Zhang P, et al. Fabrication and Interlaminar Shear Strength of 3D ‐Printed CCF ‐ PEEK Rotationally Curved Structures. Polymer Composites. 2026;47(11):10225-10240. doi:10.1002/pc.70886
BibTeX
@article{Ran2026,
author = {Ran, Xudong and Xi, Cunyin and Wang, Jianshu and Liu, Chuyu and Lei, Wei and Zhang, Peng and Sun, Shouzheng and Han, Zhenyu},
title = {Fabrication and Interlaminar Shear Strength of 3D ‐Printed CCF ‐ PEEK Rotationally Curved Structures},
journal = {Polymer Composites},
year = {2026},
volume = {47},
number = {11},
pages = {10225--10240},
doi = {10.1002/pc.70886}
}
EUVIMED