EUVIMEDSkopri EUVIMED
Open access · CC BY-NC 4.0

Reversing Fatigue Damage in Carbon Fiber–Thermoplastic Composites Using Localized Plasma Heating

Hung Wang, Benjamin L. Merry, Alex Nguyen, Agni Kumar Biswal, Vipin Kumar, Aniruddh Vashisth

Polymer Composites · 2026-05-20 · 47 (10) · 8990-9001

DOI: 10.1002/pc.70735 ↗

At a glance

Journal article in Polymer Composites, published online on 2025-12-12. Written by Hung Wang and 5 co-authors. Cited 2 times so far (Crossref); 46 references. The full text is freely available (open access, CC BY-NC 4.0). Funded by: U.S. Department of Energy, University of Washington, Office of Energy Efficiency and Renewable Energy.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Thermoplastic composites offer promising pathways for recyclable and rapidly manufacturable structural materials but suffer from limited repair strategies post‐fatigue damage. We demonstrate that plasma‐based heating can reverse mechanical degradation in short‐fiber carbon fiber/ABS composites fabricated via additive manufacturing‐compression molding (AM‐CM) process. Localized Joule heating in the conductive carbon fibers due to plasma‐composite interactions leads to volumetric matrix softening and enhanced polymer chain mobility, thereby facilitating damage healing. Mechanical testing revealed a 36% increase in yield strength following plasma treatment, recovering 91% of the strength lost to fatigue. Thermogravimetric and thermomechanical analyses established safe processing windows, while optimization of plasma parameters (gas flow: 46 L/min, nozzle rotation speed: 2800 rpm, standoff: 7 mm, speed: 10 mm/s) enabled reproducible repair conditions. Microstructural imaging confirmed matrix void closure due to localized melt flow. This work establishes a scalable, in situ repair approach for extending the service life of thermoplastic composites in load‐bearing applications.

Funding

  • U.S. Department of Energy
  • University of Washington
  • Office of Energy Efficiency and Renewable Energy
  • UT-Battelle

Cite

APA

Wang, H., Merry, B. L., Nguyen, A., Biswal, A. K., Kumar, V., & Vashisth, A. (2026). Reversing Fatigue Damage in Carbon Fiber–Thermoplastic Composites Using Localized Plasma Heating. Polymer Composites, 47(10), 8990-9001. https://doi.org/10.1002/pc.70735

Vancouver

Wang H, Merry BL, Nguyen A, Biswal AK, Kumar V, Vashisth A. Reversing Fatigue Damage in Carbon Fiber–Thermoplastic Composites Using Localized Plasma Heating. Polymer Composites. 2026;47(10):8990-9001. doi:10.1002/pc.70735

BibTeX
@article{Wang2026,
  author = {Wang, Hung and Merry, Benjamin L. and Nguyen, Alex and Biswal, Agni Kumar and Kumar, Vipin and Vashisth, Aniruddh},
  title = {Reversing Fatigue Damage in Carbon Fiber–Thermoplastic Composites Using Localized Plasma Heating},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {10},
  pages = {8990--9001},
  doi = {10.1002/pc.70735}
}
Start for free →