EUVIMEDObjevte EUVIMED
Crossref

Performance Analysis of 3D Printing Functional Prepreg Filaments Based on Carbon Nanotube Fiber Reinforced Carbon Fiber Composites

Yingbin Liang, Zhonggang Sun, Ming Zhang, Jie Liu, Ming Li, Tianyu Tang, Yuyang Zhang, Xiping Li

Polymer Composites · 2026-05-20 · 47 (10) · 8907-8921

DOI: 10.1002/pc.70728 ↗

At a glance

Journal article in Polymer Composites, published online on 2025-12-12. Written by Yingbin Liang and 7 co-authors. Cited 1 times so far (Crossref); 45 references. Funded by: National Natural Science Foundation of China.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

This study prepared carbon nanotube fiber (CNTF) reinforced carbon fiber (CF) composites via melt impregnation, addressing the performance degradation caused by excessive carbon nanotube (CNT) content in conventional methods. It investigated the influence of CNTF content on composite properties and applied the material in FDM 3D printing. Results indicate that compared to CCF/PA6, CCF‐2CNTFs/PA6 exhibited enhanced thermal stability and crystallinity, with tensile strength and tensile modulus increasing by 52.2% and 103.4%, respectively, and electrical conductivity rising by 142.4%. In 3D‐printed specimens, thermal conductivity increased by 108.2%, demonstrating superior thermal management capabilities. Microscopic characterization reveals that CNTF reduced composite porosity, enhancing interlayer bonding in printed structures. This material offers novel insights for increasing CNT content, laying the foundation for future high‐performance fiber applications in high‐stress environments.

Funding

  • National Natural Science Foundation of China

Cite

APA

Liang, Y., Sun, Z., Zhang, M., Liu, J., Li, M., Tang, T., Zhang, Y., & Li, X. (2026). Performance Analysis of 3D Printing Functional Prepreg Filaments Based on Carbon Nanotube Fiber Reinforced Carbon Fiber Composites. Polymer Composites, 47(10), 8907-8921. https://doi.org/10.1002/pc.70728

Vancouver

Liang Y, Sun Z, Zhang M, Liu J, Li M, Tang T, et al. Performance Analysis of 3D Printing Functional Prepreg Filaments Based on Carbon Nanotube Fiber Reinforced Carbon Fiber Composites. Polymer Composites. 2026;47(10):8907-8921. doi:10.1002/pc.70728

BibTeX
@article{Liang2026,
  author = {Liang, Yingbin and Sun, Zhonggang and Zhang, Ming and Liu, Jie and Li, Ming and Tang, Tianyu and Zhang, Yuyang and Li, Xiping},
  title = {Performance Analysis of 3D Printing Functional Prepreg Filaments Based on Carbon Nanotube Fiber Reinforced Carbon Fiber Composites},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {10},
  pages = {8907--8921},
  doi = {10.1002/pc.70728}
}
Start for free →