EUVIMEDEUVIMED entdecken
Crossref

Effects of Nesting Configuration and Foam Fillers on the Axial Crushing of Carbon Fiber Epoxy Composite Tubes

Muhammet Muaz Yalçın, Mehmet İskender Özsoy

Polymer Composites · 10.05.2026 · 47 (9) · 7800-7811

DOI: 10.1002/pc.70651 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 14.11.2025. Verfasst von Muhammet Muaz Yalçın und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 45 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the axial crushing behavior and energy absorption characteristics of nested carbon fiber reinforced polymer (CFRP) tubes, both empty and filled with expanded polypropylene (EPP) foam, under quasi‐static compression loading. The research explores how variations in tube geometry, specifically diameter, length, and nesting configuration affect crashworthiness parameters such as specific energy absorption (SEA), crush force efficiency (CFE), and absorbed energy (AE). Three different nesting arrangements were tested: equal‐length tubes, short‐to‐long, and long‐to‐short configurations. Results showed that equal‐length CFRP tubes exhibited the highest peak force (~76 kN) and absorbed energy (~3683 J), indicating superior load‐carrying capacity and crashworthiness. With the EPP foam added, the energy absorption performance significantly improved, with the highest energy increase (37%) observed in the equal‐length configuration. Foam‐filled structures also showed a more stable deformation pattern, preventing abrupt force drops typically observed in empty tubes. However, although AE values improved, the gains in SEA were more modest, and in some configurations, SEA even slightly decreased, indicating that higher energy absorption does not necessarily translate to greater efficiency. The short‐to‐long arrangement exhibited abrupt force increases due to sequential tube engagement, while the long‐to‐short design showed smoother force transitions but lower overall energy absorption. These findings underscore the influence of geometric arrangement and foam reinforcement on the progressive failure mechanisms and energy absorption potential of CFRP tubes.

Zitieren

APA

Yalçın, M. M., & Özsoy, M. İ. (2026). Effects of Nesting Configuration and Foam Fillers on the Axial Crushing of Carbon Fiber Epoxy Composite Tubes. Polymer Composites, 47(9), 7800-7811. https://doi.org/10.1002/pc.70651

Vancouver

Yalçın MM, Özsoy Mİ. Effects of Nesting Configuration and Foam Fillers on the Axial Crushing of Carbon Fiber Epoxy Composite Tubes. Polymer Composites. 2026;47(9):7800-7811. doi:10.1002/pc.70651

BibTeX
@article{Yaln2026,
  author = {Yalçın, Muhammet Muaz and Özsoy, Mehmet İskender},
  title = {Effects of Nesting Configuration and Foam Fillers on the Axial Crushing of Carbon Fiber Epoxy Composite Tubes},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {9},
  pages = {7800--7811},
  doi = {10.1002/pc.70651}
}
Kostenlos starten →