EUVIMEDEUVIMED entdecken
Crossref

Axial Crushing Behaviors of Metal Density Gradient Foam-Filled Square Taper Tubes: Analytical Model and Numerical Calculation

Xiwei Wu, Jianxun Zhang

Journal of Applied Mechanics · 01.09.2023 · 90 (9)

DOI: 10.1115/1.4062577 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Mechanics, online erschienen am 09.06.2023. Verfasst von Xiwei Wu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 39 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal tube is a traditional energy-absorbing structure, and metal foam is a lightweight material with advantages, i.e., high energy absorption and high specific strength. The foam-filled square tube can improve crashworthiness and has better energy absorption, which is higher than the sum of the energy absorption of the tube and foam. Axial crushing behaviors of metal density gradient foam (DGF) filled square taper tubes are studied analytically and numerically in this paper. An analytical model is presented to study the crushing behavior of DGF-filled square taper metal tube under axial loading, in which the interaction between square taper tube and DGF is considered. The numerical calculation is conducted, and the deformation mode is obtained. The analytical predictions are well consistent with the experimental and numerical results. The influences of taper angle, foam strength, maximum relative density, and minimum relative density of gradient foam on the compressive behavior of metal DGF-filled square taper tubes under axial loading are considered. It is demonstrated that when the taper angle is less than 85 deg, the average crushing force increases as the minimum density of the DGF increases. However, when the taper angle is greater than 85 deg, the average crushing force decreases with the increase of the minimum density of the gradient. This proposed analytical model can effectively predict the axial crushing behaviors of metal DGF-filled square taper tubes.

Zitieren

APA

Wu, X., & Zhang, J. (2023). Axial Crushing Behaviors of Metal Density Gradient Foam-Filled Square Taper Tubes: Analytical Model and Numerical Calculation. Journal of Applied Mechanics, 90(9). https://doi.org/10.1115/1.4062577

Vancouver

Wu X, Zhang J. Axial Crushing Behaviors of Metal Density Gradient Foam-Filled Square Taper Tubes: Analytical Model and Numerical Calculation. Journal of Applied Mechanics. 2023;90(9). doi:10.1115/1.4062577

BibTeX
@article{Wu2023,
  author = {Wu, Xiwei and Zhang, Jianxun},
  title = {Axial Crushing Behaviors of Metal Density Gradient Foam-Filled Square Taper Tubes: Analytical Model and Numerical Calculation},
  journal = {Journal of Applied Mechanics},
  year = {2023},
  volume = {90},
  number = {9},
  doi = {10.1115/1.4062577}
}
Kostenlos starten →