EUVIMEDDescoperă EUVIMED
Crossref

Influence of Cooling Rate on Residual Strain Evolution and Interlaminar Properties in Thermoplastic Composites With Embedded FBG Monitoring

Zijing Qu, Yibo Li, Minghui Huang

Polymer Composites · 2026-04-10 · 47 (7) · 6225-6240

DOI: 10.1002/pc.70553 ↗

At a glance

Journal article in Polymer Composites, published online on 2025-10-24. Written by Zijing Qu and 2 co-authors. Cited 3 times so far (Crossref); 34 references. Funded by: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

RezumatDate bibliograficeCiteRelated studies

Abstract (original language)

This study utilizes fiber Bragg grating (FBG) sensors to monitor the real‐time evolution of residual strain in thermoplastic composite structures during the hot‐press forming process under different cooling rates. Three representative structures—pure polyether ether ketone (PEEK) resin, carbon fiber‐reinforced polyether ether ketone (CF/PEEK) composites, and aluminum alloy/carbon fiber‐reinforced polyether ether ketone (AL/CF/PEEK)—were investigated. Differential scanning calorimetry (DSC) was employed to analyze the influence of crystallization temperature on the final residual strain. Double cantilever beam (DCB) and short beam shear (SBS) tests were conducted to evaluate the interlaminar fracture toughness and shear resistance of fiber–fiber and fiber–metal interfaces at different cooling rates. The results demonstrate that cooling rate modulates the crystallization morphology of the thermoplastic matrix, thereby influencing material performance. In the CF/PEEK system, a faster cooling rate reduced crystallinity, leading to decreased residual strain and enhanced interlaminar toughness and shear strength. However, in the AL/CF/PEEK system, excessive cooling rates compromised cooling uniformity, increased residual strain, and deteriorated interlaminar performance. The findings reveal that the residual strain in high‐performance thermoplastic structures is governed by both resin crystallization and interlayer cooling uniformity, which ultimately determine interlaminar mechanical properties.

Funding

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Cite

APA

Qu, Z., Li, Y., & Huang, M. (2026). Influence of Cooling Rate on Residual Strain Evolution and Interlaminar Properties in Thermoplastic Composites With Embedded FBG Monitoring. Polymer Composites, 47(7), 6225-6240. https://doi.org/10.1002/pc.70553

Vancouver

Qu Z, Li Y, Huang M. Influence of Cooling Rate on Residual Strain Evolution and Interlaminar Properties in Thermoplastic Composites With Embedded FBG Monitoring. Polymer Composites. 2026;47(7):6225-6240. doi:10.1002/pc.70553

BibTeX
@article{Qu2026,
  author = {Qu, Zijing and Li, Yibo and Huang, Minghui},
  title = {Influence of Cooling Rate on Residual Strain Evolution and Interlaminar Properties in Thermoplastic Composites With Embedded FBG Monitoring},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {7},
  pages = {6225--6240},
  doi = {10.1002/pc.70553}
}
Start for free →