EUVIMEDDescoperă EUVIMED
Crossref

Interlaminar Failure Behavior of Continuous Carbon Fiber Reinforced PEEK Composites Fabricated by Additive Manufacturing: Role of Failure Modes and Operating Temperature

Haibin Tang, Kai Yang, Zhenyang Li, Xingzhi Xiao, Qingping Sun

Polymer Composites · 2026-01-20 · 47 (2) · 1605-1617

DOI: 10.1002/pc.70239 ↗

At a glance

Journal article in Polymer Composites, published online on 2025-07-29. Written by Haibin Tang and 4 co-authors. Cited 5 times so far (Crossref); 56 references. Funded by: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

RezumatDate bibliograficeCiteRelated studies

Abstract (original language)

Continuous carbon fiber reinforced PEEK (CCF/PEEK) composites manufactured using material extrusion additive manufacturing (MEX) show great promise for aerospace applications. However, the interlaminar failure mechanisms under different failure modes and operating temperatures are still not fully understood. This study systematically investigates the interlaminar fracture behavior of MEXed CCF/PEEK composites using double cantilever beam (DCB), three‐point end‐notched flexure (3ENF), and mixed‐mode bending (MMB) tests, covering pure Mode‐I, pure Mode‐II, and mixed‐mode loading conditions. In addition, Mode‐I interlaminar fracture behavior is evaluated at 130°C and 230°C to assess temperature effects. Furthermore, finite element analysis (FEA) models incorporating a cohesive zone method are developed, using a combined quadratic stress criterion and Benzeggagh–Kenane (B–K) fracture criterion to simulate interlaminar failure. The results show that at room temperature, the Mode‐I and Mode‐II interlaminar fracture toughness values ( G IC and G IIC ) are 0.63 and 1.22 N/mm, respectively. The mixed‐mode fracture analysis yields a B–K material parameter of 0.73, allowing successful construction of the complete interlaminar fracture envelope. At elevated temperatures, G IC increases to 1.35 N/mm (130°C) and 1.32 N/mm (230°C), attributed to the PEEK matrix's improved plastic deformation capability. The calibrated FEA models effectively replicate the observed interlaminar fracture behavior, allowing reliable interlaminar failure analysis of MEXed composites.

Funding

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Cite

APA

Tang, H., Yang, K., Li, Z., Xiao, X., & Sun, Q. (2026). Interlaminar Failure Behavior of Continuous Carbon Fiber Reinforced PEEK Composites Fabricated by Additive Manufacturing: Role of Failure Modes and Operating Temperature. Polymer Composites, 47(2), 1605-1617. https://doi.org/10.1002/pc.70239

Vancouver

Tang H, Yang K, Li Z, Xiao X, Sun Q. Interlaminar Failure Behavior of Continuous Carbon Fiber Reinforced PEEK Composites Fabricated by Additive Manufacturing: Role of Failure Modes and Operating Temperature. Polymer Composites. 2026;47(2):1605-1617. doi:10.1002/pc.70239

BibTeX
@article{Tang2026,
  author = {Tang, Haibin and Yang, Kai and Li, Zhenyang and Xiao, Xingzhi and Sun, Qingping},
  title = {Interlaminar Failure Behavior of Continuous Carbon Fiber Reinforced PEEK Composites Fabricated by Additive Manufacturing: Role of Failure Modes and Operating Temperature},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {2},
  pages = {1605--1617},
  doi = {10.1002/pc.70239}
}
Start for free →