EUVIMEDScopri EUVIMED
Open access · CC BY-NC-ND 4.0

Investigation of Mechanical and Thermal Properties of Modified Silica Aerogels/Epoxy/Aramid Composites

Hasan Yavuz Ünal, Selay Sert Çok, Fatoş Koç, Nilay Gizli, Yeliz Pekbey

Polymer Composites · 2025-11-10 · 46 (16) · 15313-15330

DOI: 10.1002/pc.30131 ↗

At a glance

Journal article in Polymer Composites, published online on 2025-06-11. Written by Hasan Yavuz Ünal and 4 co-authors. Cited 4 times so far (Crossref); 63 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Türkiye Bilimsel ve Teknolojik Araştırma Kurumu.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

Due to its high pore size and low density, amine‐modified silica aerogel (XSA) is an excellent candidate for the secondary reinforcement material of polymer matrix composites. In this study, the mechanical, thermal, and morphological properties of amine‐modified silica aerogel‐reinforced aramid/epoxy composite (EAFS) produced by the hand lay‐up method were investigated. According to the resin weight, 1 wt.% (EAFS‐1), 2 wt.% (EAFS‐2), and 3 wt.% (EAFS‐3) XSA reinforcements were dispersed into the epoxy resin by ultrasonic mixer. Tensile, three‐point bending, compression, and shear tests were performed to determine the mechanical properties, while thermal properties were determined by dynamic mechanical analysis and thermogravimetric analysis. The mechanical properties demonstrated an upward trend up to EAFS‐2, after which a decline was observed at EAFS‐3. Tensile strength, modulus of elasticity, flexural strength, flexural modulus, and compressive strength of EAFS‐2 increased by 20.43%, 30.91%, 10.09%, 24.01%, and 3.62%, respectively, compared to EAFS‐0. Furthermore, the incorporation of XSA reinforcement resulted in a delay in the onset and endset of the degradation temperature.

Funding

  • Türkiye Bilimsel ve Teknolojik Araştırma Kurumu

Cite

APA

Ünal, H. Y., Çok, S. S., Koç, F., Gizli, N., & Pekbey, Y. (2025). Investigation of Mechanical and Thermal Properties of Modified Silica Aerogels/Epoxy/Aramid Composites. Polymer Composites, 46(16), 15313-15330. https://doi.org/10.1002/pc.30131

Vancouver

Ünal HY, Çok SS, Koç F, Gizli N, Pekbey Y. Investigation of Mechanical and Thermal Properties of Modified Silica Aerogels/Epoxy/Aramid Composites. Polymer Composites. 2025;46(16):15313-15330. doi:10.1002/pc.30131

BibTeX
@article{nal2025,
  author = {Ünal, Hasan Yavuz and Çok, Selay Sert and Koç, Fatoş and Gizli, Nilay and Pekbey, Yeliz},
  title = {Investigation of Mechanical and Thermal Properties of Modified Silica Aerogels/Epoxy/Aramid Composites},
  journal = {Polymer Composites},
  year = {2025},
  volume = {46},
  number = {16},
  pages = {15313--15330},
  doi = {10.1002/pc.30131}
}
Start for free →