EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Investigation of Mechanical and Thermal Properties of Modified Silica Aerogels/Epoxy/Aramid Composites

Hasan Yavuz Ünal, Selay Sert Çok, Fatoş Koç, Nilay Gizli, Yeliz Pekbey

Polymer Composites · 10.11.2025 · 46 (16) · 15313-15330

DOI: 10.1002/pc.30131 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 11.06.2025. Verfasst von Hasan Yavuz Ünal und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Türkiye Bilimsel ve Teknolojik Araştırma Kurumu.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to its high pore size and low density, amine‐modified silica aerogel (XSA) is an excellent candidate for the secondary reinforcement material of polymer matrix composites. In this study, the mechanical, thermal, and morphological properties of amine‐modified silica aerogel‐reinforced aramid/epoxy composite (EAFS) produced by the hand lay‐up method were investigated. According to the resin weight, 1 wt.% (EAFS‐1), 2 wt.% (EAFS‐2), and 3 wt.% (EAFS‐3) XSA reinforcements were dispersed into the epoxy resin by ultrasonic mixer. Tensile, three‐point bending, compression, and shear tests were performed to determine the mechanical properties, while thermal properties were determined by dynamic mechanical analysis and thermogravimetric analysis. The mechanical properties demonstrated an upward trend up to EAFS‐2, after which a decline was observed at EAFS‐3. Tensile strength, modulus of elasticity, flexural strength, flexural modulus, and compressive strength of EAFS‐2 increased by 20.43%, 30.91%, 10.09%, 24.01%, and 3.62%, respectively, compared to EAFS‐0. Furthermore, the incorporation of XSA reinforcement resulted in a delay in the onset and endset of the degradation temperature.

Förderung

  • Türkiye Bilimsel ve Teknolojik Araştırma Kurumu

Zitieren

APA

Ünal, H. Y., Çok, S. S., Koç, F., Gizli, N., & Pekbey, Y. (2025). Investigation of Mechanical and Thermal Properties of Modified Silica Aerogels/Epoxy/Aramid Composites. Polymer Composites, 46(16), 15313-15330. https://doi.org/10.1002/pc.30131

Vancouver

Ünal HY, Çok SS, Koç F, Gizli N, Pekbey Y. Investigation of Mechanical and Thermal Properties of Modified Silica Aerogels/Epoxy/Aramid Composites. Polymer Composites. 2025;46(16):15313-15330. doi:10.1002/pc.30131

BibTeX
@article{nal2025,
  author = {Ünal, Hasan Yavuz and Çok, Selay Sert and Koç, Fatoş and Gizli, Nilay and Pekbey, Yeliz},
  title = {Investigation of Mechanical and Thermal Properties of Modified Silica Aerogels/Epoxy/Aramid Composites},
  journal = {Polymer Composites},
  year = {2025},
  volume = {46},
  number = {16},
  pages = {15313--15330},
  doi = {10.1002/pc.30131}
}
Kostenlos starten →