Development of graphite‐reinforced PLA / PBAT composite filaments
Polymer Composites · 20.10.2025 · 46 (15) · 13677-13689
DOI: 10.1002/pc.30015 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 09.05.2025. Verfasst von Samuel Nogueira Figueiredo und 11 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Conselho Nacional de Desenvolvimento Científico e Tecnológico.
Abstract (Originalsprache)
Additive manufacturing, particularly Fused Deposition Modeling (FDM), has been increasingly used due to its ability to create complex and personalized products. Besides, this processing technique can be performed with biodegradable polymers such as polylactic acid (PLA), a pioneer polymer in additive manufacturing profiles. Despite having a good set of desirable properties, the low impact strength and heat resistance of PLA limit its applications, which leads to studies on the use of different biodegradable polymers and additives. This study developed PLA/PBAT composite filaments with graphite (2.5%–12.5%) for FDM, evaluating their printability, microstructure, thermal, and mechanical properties. Morphological analysis showed homogeneous graphite dispersion, with the 7.5% graphite formulation (EC/7.5G) exhibiting optimal interlayer adhesion and minimal voids, yielding denser parts with superior printability. FTIR confirmed characteristic functional groups, while TGA indicated enhanced thermal stability, with the 12.5% graphite formulation (EC/12.5G) achieving the highest onset degradation temperature (T5 at 337.3°C). Tensile tests revealed the 2.5% graphite formulation (EC/2.5G) had the highest elongation at break (815.57%), though the elastic modulus decreased with increasing graphite content. DMA showed improved storage modulus at lower temperatures, with the 7.5% graphite formulation balancing stiffness and ductility. Printed parts demonstrated high dimensional accuracy and surface finish. The 7.5% graphite formulation (EC/7.5G) emerged as the optimal composition, offering enhanced thermal stability, mechanical performance, and printability, making it a promising candidate for sustainable, functional 3D printing applications. Highlights Novel composite filament developed by combining PLA, PBAT, and graphite. Graphite incorporation enhanced the thermal stability of the composite filaments. Sustainable and versatile filament alternative to conventional options. Printability that allows high dimensional regularity.
Förderung
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
Zitieren
APA
Figueiredo, S. N., Dias, A. R. D. O., Leitão, L. V., Folkersma, R., Janssen, K., Sampaio, A. A. S., Almeida, I. O., Azevedo, J. B., Carvalho, L. H. D., Torres, F. D. P. M., Barbosa, R., & Alves, T. S. (2025). Development of graphite‐reinforced PLA / PBAT composite filaments. Polymer Composites, 46(15), 13677-13689. https://doi.org/10.1002/pc.30015
Vancouver
Figueiredo SN, Dias ARDO, Leitão LV, Folkersma R, Janssen K, Sampaio AAS, et al. Development of graphite‐reinforced PLA / PBAT composite filaments. Polymer Composites. 2025;46(15):13677-13689. doi:10.1002/pc.30015
BibTeX
@article{Figueiredo2025,
author = {Figueiredo, Samuel Nogueira and Dias, Alisson Rodrigues de Oliveira and Leitão, Luigi Veloso and Folkersma, Rudy and Janssen, Kylian and Sampaio, Arthur Antonio Sousa and Almeida, Ilana Oliveira and Azevedo, Joyce Batista and Carvalho, Laura Hecker de and Torres, Fábio Delano Penha Marques and Barbosa, Renata and Alves, Tatianny Soares},
title = {Development of graphite‐reinforced PLA / PBAT composite filaments},
journal = {Polymer Composites},
year = {2025},
volume = {46},
number = {15},
pages = {13677--13689},
doi = {10.1002/pc.30015}
}
EUVIMED