Sustainable hybrid composites from flax, vetiver, and Luffa cylindrica : Acoustic and structural performance
Polymer Composites · 10.10.2025 · 46 (14) · 12818-12834
DOI: 10.1002/pc.29900 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 08.04.2025. Verfasst von Gokulkumar Sivanantham und 7 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 71 Literaturangaben. Gefördert von: King Mongkut's University of Technology North Bangkok.
Abstract (Originalsprache)
Sustainable, eco‐friendly composites have always been of great interest due to increasing environmental awareness. In this regard, there is a continuous demand for alternative sustainable materials with enhanced performance. This study focuses on the development of sustainable hybrid composites using flax fibers, vetiver root fibers, and Luffa cylindrica fillers. Composites were fabricated using varied fiber loading ratios and evaluated for tensile, flexural, impact, interlaminar shear strengths, and sound absorption capabilities. Pure flax composites (FV) exhibited the highest tensile strength (40.2 MPa), whereas the hybrid containing two flax layers and 51 g of vetiver fiber (FVL3) achieved the best acoustic absorption, attenuating up to 65% of incident sound. Morphological analysis via SEM revealed that optimized fiber–matrix bonding and a well‐distributed porous network in FVL3 contributed to its superior sound absorption. Although vetiver‐rich composites showed improved impact behavior, excessive vetiver content led to diminished tensile properties due to lower cellulose levels and reduced fiber–matrix adhesion. The results confirm that balancing flax and vetiver inclusions can tailor mechanical and acoustic performance. Consequently, FVL3 is recommended for noise mitigation applications, such as acoustic wall panels, where moderate mechanical strength and high sound absorption are essential. Meanwhile, pure flax‐based laminates (FV) can be prioritized in load‐bearing scenarios requiring higher tensile strength. Therefore, the findings underscore the potential of flax–vetiver–luffa (FVL) hybrids as sustainable alternatives for structural and noise‐control applications, offering a route to environmentally responsible composite design without sacrificing performance. Highlights Eco‐friendly hybrid composites developed using flax, vetiver, and luffa. Alkali treatment improves fiber‐matrix bonding and composite performance. Flax composites achieve the highest tensile strength of 40.2 MPa. FVL3 composite absorbs 59% of sound, ideal for acoustic applications. Sustainable, biodegradable materials reduce environmental impact effectively.
Förderung
- King Mongkut's University of Technology North Bangkok
Zitieren
APA
Sivanantham, G., Ayyappan, V., Loganathan, P., Mani, S. K., Vijaya, G. S., Raghunathan, V., Rangappa, S. M., & Siengchin, S. (2025). Sustainable hybrid composites from flax, vetiver, and Luffa cylindrica : Acoustic and structural performance. Polymer Composites, 46(14), 12818-12834. https://doi.org/10.1002/pc.29900
Vancouver
Sivanantham G, Ayyappan V, Loganathan P, Mani SK, Vijaya GS, Raghunathan V, et al. Sustainable hybrid composites from flax, vetiver, and Luffa cylindrica : Acoustic and structural performance. Polymer Composites. 2025;46(14):12818-12834. doi:10.1002/pc.29900
BibTeX
@article{Sivanantham2025,
author = {Sivanantham, Gokulkumar and Ayyappan, Vinod and Loganathan, Prabhu and Mani, Sasi Kumar and Vijaya, Gurupranes Sivaraj and Raghunathan, Vijay and Rangappa, Sanjay Mavinkere and Siengchin, Suchart},
title = {Sustainable hybrid composites from flax, vetiver, and Luffa cylindrica : Acoustic and structural performance},
journal = {Polymer Composites},
year = {2025},
volume = {46},
number = {14},
pages = {12818--12834},
doi = {10.1002/pc.29900}
}
EUVIMED