EUVIMEDOpdag EUVIMED
Crossref

A predictive model for electrical conductivity of polymer carbon black nanocomposites

Fereshteh Abdollahi, Mohsen Mohammadi, Yasser Zare, Muhammad Tajammal Munir, Kyong Yop Rhee, Soo‐Jin Park

Polymer Composites · 2025-06-10 · 46 (8) · 7491-7502

DOI: 10.1002/pc.29444 ↗

At a glance

Journal article in Polymer Composites, published online on 2024-12-31. Written by Fereshteh Abdollahi and 5 co-authors. Cited 18 times so far (Crossref); 57 references.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Although many studies have investigated the percolation threshold and conductivity in the polymer carbon black (CB) nanocomposites (PCBs) by experimental data, the modeling in this field is a topic previously overlooked in literature. This paper suggests a simple equation for percolation threshold in PCBs by the surface properties of polymer and CB a well as interphase depth ( t ). Also, the electrical conductivity of PCBs is simulated by CB radius ( R ), tunneling distance ( λ ) and interphase depth. The offered model is validated by experimented findings of numerous samples and parametric examinations. A thicker interphase and a higher interfacial tension positively reduce the percolation onset. The smaller CBs, lower percolation threshold, and smaller tunnels enhance the electrical conductivity of PCBs. The low percolation threshold of 0.01 is obtained by the low R (15 nm) and the thick interphase (35 nm). Also, R = 15 nm and t = 35 nm maximize the PCB conductivity to 6 S/m. These results signify the important roles of CB radius and interphase depth in the percolation threshold and conductivity of PCBs. In addition, network fraction ( f ) of 0.7 and λ = 1 nm produce the uppermost PCB conductivity of 1.6 S/m, but the system is insulated at CB network fraction less than 0.35 or tunneling distance more than 2 nm. Therefore, high network fraction and low tunneling distance are needed to enhance the conductivity of PCBs. Highlights An equation for percolation onset of PCBs is proposed by CB radius and interphase depth. The offered model is validated by experimented data and parametric examinations. A thicker interphase and a higher interfacial tension positively reduce the percolation onset. Smaller CBs, lower percolation onset, and smaller tunnels enhance the PCB conductivity. CB radius and interphase depth significantly manage the conductivity of PCBs.

Cite

APA

Abdollahi, F., Mohammadi, M., Zare, Y., Munir, M. T., Rhee, K. Y., & Park, S. (2025). A predictive model for electrical conductivity of polymer carbon black nanocomposites. Polymer Composites, 46(8), 7491-7502. https://doi.org/10.1002/pc.29444

Vancouver

Abdollahi F, Mohammadi M, Zare Y, Munir MT, Rhee KY, Park S. A predictive model for electrical conductivity of polymer carbon black nanocomposites. Polymer Composites. 2025;46(8):7491-7502. doi:10.1002/pc.29444

BibTeX
@article{Abdollahi2025,
  author = {Abdollahi, Fereshteh and Mohammadi, Mohsen and Zare, Yasser and Munir, Muhammad Tajammal and Rhee, Kyong Yop and Park, Soo‐Jin},
  title = {A predictive model for electrical conductivity of polymer carbon black nanocomposites},
  journal = {Polymer Composites},
  year = {2025},
  volume = {46},
  number = {8},
  pages = {7491--7502},
  doi = {10.1002/pc.29444}
}
Start for free →