EUVIMEDObjevte EUVIMED
Crossref

Prediction of mechanical properties of flax/basalt short fiber hybrid polylactic acid composites based on Micro‐ CT

Wenlong Mu, Shikun Zhang, Xianglin Chen, Shijie Li, Liangyu Chen, Hongli Chen

Polymer Composites · 2025-04-20 · 46 (6) · 5172-5187

DOI: 10.1002/pc.29282 ↗

At a glance

Journal article in Polymer Composites, published online on 2024-11-20. Written by Wenlong Mu and 5 co-authors. Cited 7 times so far (Crossref); 26 references. Funded by: Key Scientific Research Project of Colleges and Universities in Henan Province, Henan Provincial Science and Technology Research Project.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Research on the performance design and prediction method of low carbon degradable composite materials is of great significance for realizing energy saving and emission reduction of automobile industry. In this study, plant short fiber reinforced polylactic acid composite (PFRP) was prepared by injection molding method and reinforced with basalt fiber to obtain flax/basalt short fiber hybrid reinforced composite (FBFRP). The mechanical properties of the composites were evaluated by quasi‐static tensile/ bending test and scanning electron microscopy (SEM). It was observed that addition of basalt fiber further enhances the properties of the composite, and the properties of the composite are the best when the mass fraction of flax and basalt fiber is 30% and 9%. The fiber distribution inside FBFRP was analyzed by micro‐computed tomography (Micro‐CT) technology. Based on the real spatial characteristics of the fibers inside the materials, a microcosmic representative volume element (RVE) model of hybrid composites was established by writing a random adsorption algorithm script in Python. By defining the damage constitutive of each component, the macroscopic equivalent mechanical property parameters were obtained, and the influence of the interface thickness on the simulation results was studied. On this basis, the tensile and bending failure simulation of macro‐composite materials is carried out, and the mechanical properties prediction of hybrid fiber composites based on multi‐scale method is successfully realized. Highlights Using Micro‐CT technique and random adsorption algorithm, the RVE model based on the real fiber distribution inside the composite was obtained. Through cross‐scale simulation, the macroscopic equivalent mechanical properties of the composite were obtained. The effect of fiber‐matrix interface thickness on the simulation results is considered.

Funding

  • Key Scientific Research Project of Colleges and Universities in Henan Province
  • Henan Provincial Science and Technology Research Project

Cite

APA

Mu, W., Zhang, S., Chen, X., Li, S., Chen, L., & Chen, H. (2025). Prediction of mechanical properties of flax/basalt short fiber hybrid polylactic acid composites based on Micro‐ CT. Polymer Composites, 46(6), 5172-5187. https://doi.org/10.1002/pc.29282

Vancouver

Mu W, Zhang S, Chen X, Li S, Chen L, Chen H. Prediction of mechanical properties of flax/basalt short fiber hybrid polylactic acid composites based on Micro‐ CT. Polymer Composites. 2025;46(6):5172-5187. doi:10.1002/pc.29282

BibTeX
@article{Mu2025,
  author = {Mu, Wenlong and Zhang, Shikun and Chen, Xianglin and Li, Shijie and Chen, Liangyu and Chen, Hongli},
  title = {Prediction of mechanical properties of flax/basalt short fiber hybrid polylactic acid composites based on Micro‐ CT},
  journal = {Polymer Composites},
  year = {2025},
  volume = {46},
  number = {6},
  pages = {5172--5187},
  doi = {10.1002/pc.29282}
}
Start for free →