EUVIMEDSkopri EUVIMED
Crossref

Comparison of the dynamic characteristics of GFRP , CFRP, and hybrid composites subjected to repeated low‐velocity impact

Betul Sozen, Taner Coskun, Serkan Kapıcı, Omer Sinan Sahin

Polymer Composites · 2024-12-10 · 45 (17) · 15941-15953

DOI: 10.1002/pc.28881 ↗

At a glance

Journal article in Polymer Composites, published online on 2024-08-11. Written by Betul Sozen and 3 co-authors. Cited 22 times so far (Crossref); 30 references.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

The current study used the vacuum‐assisted hand lay‐up method (VAHLM) to manufacture glass fiber‐reinforced polymer (GFRP), carbon fiber‐reinforced polymer (CFRP), and glass/carbon fiber‐reinforced hybrid composites to examine the influences of fiber materials and hybridization on the repeated low‐velocity impact (LVI) responses. In this regard, the manufactured composites were exposed to repeated LVI loading at 3 m/s under 25.2 J impact energy, and thus dynamic characteristics such as total impulse, contact/bending stiffness, interaction time, peak force/displacement, and absorbed‐rebounded energies depending on the impact number were acquired. LVI tests were continued until penetration was observed in the composites, at which point the penetration threshold numbers for each composite type were acquired. Furthermore, the macro‐scale damage analyses depending on the impact number were gradually examined, and the impacts of hybridization and fiber material on the damage mechanisms were determined. The study found that GFRP, hybrid and CFRP composites had the highest impact resistance, respectively, and that glass fiber‐reinforcement is well‐suited for applications that require higher impact resistance. When the average penetration threshold numbers for the composites were examined, it was observed that GFRP composites had approximately five times higher penetration threshold numbers than CFRP composites and that hybrid specimens exhibited similar properties to CFRP composites in terms of impact resistance. This scenario was linked to the various deformation capabilities of glass and carbon fibers, and it was concluded that the high‐deformation capability of the fibers improved the penetration threshold numbers. Highlights Effects of hybridization and fiber material on LVI responses were examined. Fiber material has a significant influence on impact resistance. Penetration threshold number can be associated with the fibers' strain capability. The adhesion factor plays an active role in the damage of hybrid specimens.

Cite

APA

Sozen, B., Coskun, T., Kapıcı, S., & Sahin, O. S. (2024). Comparison of the dynamic characteristics of GFRP , CFRP, and hybrid composites subjected to repeated low‐velocity impact. Polymer Composites, 45(17), 15941-15953. https://doi.org/10.1002/pc.28881

Vancouver

Sozen B, Coskun T, Kapıcı S, Sahin OS. Comparison of the dynamic characteristics of GFRP , CFRP, and hybrid composites subjected to repeated low‐velocity impact. Polymer Composites. 2024;45(17):15941-15953. doi:10.1002/pc.28881

BibTeX
@article{Sozen2024,
  author = {Sozen, Betul and Coskun, Taner and Kapıcı, Serkan and Sahin, Omer Sinan},
  title = {Comparison of the dynamic characteristics of GFRP , CFRP, and hybrid composites subjected to repeated low‐velocity impact},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {17},
  pages = {15941--15953},
  doi = {10.1002/pc.28881}
}
Start for free →