Experimental study on the effects of SS304 and Aluminium reinforcements on mechanical and vibration properties in jute‐epoxy composites
Polymer Composites · 10.10.2024 · 45 (14) · 13359-13377
DOI: 10.1002/pc.28708 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 18.06.2024. Verfasst von Aniket Salve und 1 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 43 Literaturangaben.
Abstract (Originalsprache)
Jute fiber has emerged as a promising reinforcement material in polymer composites, and researchers are actively exploring hybrid composite materials to overcome its individual mechanical property limitations and enhance overall performance. The paper introduces a unique hybridization of polymer composites that harnesses the advantages of stainless steel and aluminium offering a lightweight material for potential engineering applications. In this study, stainless steel 304 wire mesh (S), aluminium wire mesh (Al) and aluminium perforated sheet (Alp) are used as an additional reinforcement along with jute (J) and glass (G) fibers to fabricate hybrid polymer composites with varying volume fractions of SS304 and Al wire mesh. Seven laminates of hybrid composites namely J/J/J/S/J/J/J, J/J/S/J/J/S/J/J, J/J/J/Al/J/J/J, J/J/Al/J/J/Al/J/J, J/J/J/Alp/J/J/J, G/J/J/J/S/J/J/J/G, (J/J/S/J/J/S/J/J)45 0 along with virgin composite laminate J/J/J/J/J/J/J/J were fabricated and tested to obtain mechanical and vibration properties. Bonding between metal wire and matrix is investigated and reported through ILLS tests and SEM observations. Experimental findings indicate a notable 24% and 7% increase in tensile and ILSS strength, respectively, with SS304 reinforcement. Moreover, significant improvements in flexural and impact strength, approximately 48% and 33% for J/J/S/J/J/S/J/J, demonstrate the effectiveness of the hybrid approach. The J/J/S/J/J/S/J/J laminate excels in damping capacity under various boundary conditions. The study underscores the potential of metallic reinforcement to enhance the mechanical properties of jute fiber‐reinforced polymer composites, presenting opportunities for the development of lightweight, sustainable, and high‐performance materials in engineering applications. Highlights Developed jute fiber‐based hybrid polymer composites with metal wire reinforcement. Significant increase in strength and stiffness observed with addition of metal wires. Bonding between metal wire and matrix is investigated through ILLS tests and SEM observations. Vibration damping of all hybrid materials is reported. Study provides valuable data to develop sustainable, lightweight, and cost‐effective materials.
Zitieren
APA
Salve, A., & Mache, A. (2024). Experimental study on the effects of SS304 and Aluminium reinforcements on mechanical and vibration properties in jute‐epoxy composites. Polymer Composites, 45(14), 13359-13377. https://doi.org/10.1002/pc.28708
Vancouver
Salve A, Mache A. Experimental study on the effects of SS304 and Aluminium reinforcements on mechanical and vibration properties in jute‐epoxy composites. Polymer Composites. 2024;45(14):13359-13377. doi:10.1002/pc.28708
BibTeX
@article{Salve2024,
author = {Salve, Aniket and Mache, Ashok},
title = {Experimental study on the effects of SS304 and Aluminium reinforcements on mechanical and vibration properties in jute‐epoxy composites},
journal = {Polymer Composites},
year = {2024},
volume = {45},
number = {14},
pages = {13359--13377},
doi = {10.1002/pc.28708}
}
EUVIMED