Effects of adding nanodiamonds in mechanical properties of jute and ramie fiber reinforced epoxy composites
Polymer Composites · 2024-09-10 · 45 (13) · 11872-11882
DOI: 10.1002/pc.28605 ↗At a glance
Journal article in Polymer Composites, 2024-06. Written by M. Arun Kumar and 4 co-authors. Cited 18 times so far (Crossref); 41 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
The objective of this research is to investigate the potential impact of nanodiamond filler particles on the mechanical and morphological characteristics of epoxy composites that are fortified with ramie and jute fibers. Composed of composite laminates containing nanodiamonds at concentrations of 0.1, 0.3, and 0.5 wt. %, the laminates were produced via vacuum‐assisted resin infusion (VARI to evaluate the alterations in mechanical properties, Vickers hardness, tensile, and flexural tests were conducted on the prepared composites). The findings showed that adding 0.3 wt. % nanodiamonds to epoxy composites significantly improved the hardness of the composites about 18.56% and 34.38%, the tensile strength of the composites about 19.1% and 28.01%, and the flexural strength of the composites about 17.7% and 21.12% for ramie/epoxy and jute/epoxy, respectively. The optimal concentration of nanodiamonds for both types of fibers in order to optimize these properties was calculated to be 0.3 wt. % of nanodiamonds. A micro‐x‐ray CT scan was performed to determine the percentage of porosity in composites. The utilization of scanning electron microscopy (SEM) demonstrated that an increase in the nanodiamond content led to enhanced fiber dispersion and reduced interfacial voids. In contrast, Fourier transform infrared (FTIR) analysis unveils the hydrophobic characteristics, cellulose content, and improved interfacial bonding between the fibers and the epoxy matrix, which is attributed to the robust covalent bonding enabled by the nanodiamonds. Highlights Adding nanodiamonds (NDs) improved adhesion at fiber‐matrix interface. Mechanical properties peaked for composites with 0.3 wt. % of NDs. Beyond 0.3 wt. % of NDs, agglomerates in composites were observed through SEM. Void percent increased for composites with 0.5 wt. % of NDs.
Cite
APA
Kumar, M. A., Selvaraj, S. K., Kanniyappan, S., Karthikeyan, B., & Chadha, U. (2024). Effects of adding nanodiamonds in mechanical properties of jute and ramie fiber reinforced epoxy composites. Polymer Composites, 45(13), 11872-11882. https://doi.org/10.1002/pc.28605
Vancouver
Kumar MA, Selvaraj SK, Kanniyappan S, Karthikeyan B, Chadha U. Effects of adding nanodiamonds in mechanical properties of jute and ramie fiber reinforced epoxy composites. Polymer Composites. 2024;45(13):11872-11882. doi:10.1002/pc.28605
BibTeX
@article{Kumar2024,
author = {Kumar, M. Arun and Selvaraj, Senthil Kumaran and Kanniyappan, Sudhakar and Karthikeyan, B. and Chadha, Utkarsh},
title = {Effects of adding nanodiamonds in mechanical properties of jute and ramie fiber reinforced epoxy composites},
journal = {Polymer Composites},
year = {2024},
volume = {45},
number = {13},
pages = {11872--11882},
doi = {10.1002/pc.28605}
}
EUVIMED