EUVIMEDObjevte EUVIMED
Crossref

Interface failure identification of argon/nitrogen double plasma modified hybrid laminated para‐aramid composites

Yuhan Zhou, Lixia Jia, Zhenhong Chen, Bao Shi, Xiayun Zhang, Yuefen Han, Huifeng Li, Ruosi Yan

Polymer Composites · 2024-01-20 · 45 (2) · 1316-1328

DOI: 10.1002/pc.27856 ↗

At a glance

Journal article in Polymer Composites, published online on 2023-10-18. Written by Yuhan Zhou and 7 co-authors. Cited 6 times so far (Crossref); 19 references. Funded by: National Natural Science Foundation of China.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

This work reveals the synergistic effect of argon/nitrogen double plasma alteration on the mechanical properties of para‐aramid fiber/epoxy resin composites with various laminating sequences. Acoustic emission monitored interface failure during tensile, bending and fracture testing. A comparative analysis was conducted on the bending performance of the composites modified by argon/nitrogen double plasma and single plasma. The results showed that the synergistic effect of nitrogen and high‐energy molecule argon optimized the modifying effect of argon/nitrogen double plasma. The optimal modification parameters obtained through fiber extraction testing analysis are power 200 W, time 120 s, and Ar/N 2 double gas flow rate of 12 sccm. After plasma treatment, twill weave modifies better than plain weave. The AE signal amplitude of PX1 is minimized during stretching. Due to the difference in internal bending stiffness of PX2, interface delamination failure is more likely to occur. The PX5 had greater fiber and matrix debonding failure between mode‐II fracture tests due to the weak modification effect of plain weave and its difficulty in deformation. In ballistic testing, PX1 blocks impact force through fiber bundle stretching deformation, while PX4 is more brittle. Highlights Prepare para‐aramid/epoxy resin composites with various laminating sequences. Study on the interfacial properties of composites treated with double plasma. The composites with different gas sources treatment were analyzed. Acoustic emission analysis was used to identify interface failure modes. The bonding strength between plain and plain interfaces is the lowest.

Funding

  • National Natural Science Foundation of China

Cite

APA

Zhou, Y., Jia, L., Chen, Z., Shi, B., Zhang, X., Han, Y., Li, H., & Yan, R. (2024). Interface failure identification of argon/nitrogen double plasma modified hybrid laminated para‐aramid composites. Polymer Composites, 45(2), 1316-1328. https://doi.org/10.1002/pc.27856

Vancouver

Zhou Y, Jia L, Chen Z, Shi B, Zhang X, Han Y, et al. Interface failure identification of argon/nitrogen double plasma modified hybrid laminated para‐aramid composites. Polymer Composites. 2024;45(2):1316-1328. doi:10.1002/pc.27856

BibTeX
@article{Zhou2024,
  author = {Zhou, Yuhan and Jia, Lixia and Chen, Zhenhong and Shi, Bao and Zhang, Xiayun and Han, Yuefen and Li, Huifeng and Yan, Ruosi},
  title = {Interface failure identification of argon/nitrogen double plasma modified hybrid laminated para‐aramid composites},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {2},
  pages = {1316--1328},
  doi = {10.1002/pc.27856}
}
Start for free →