EUVIMEDEUVIMED entdecken
Crossref

Effect of mold on curing deformation of resin transfer molding ‐made textile composites

Ce Zhang, Ying Sun, Jing Xu, Xiaoping Shi, Guoli Zhang

Polymer Composites · 2023-11 · 44 (11) · 7599-7610

DOI: 10.1002/pc.27648 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 14.08.2023. Verfasst von Ce Zhang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 25 Literaturangaben. Gefördert von: Natural Science Foundation of Tianjin Municipality.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the process of preparing textile composites by resin transfer molding (RTM) method, both the upper and lower surface of the mold will interact with the composite parts due to the mismatch of thermal expansion coefficient between the mold and the part, resulting in warpage deformation. To address this key technical problem, this article first studied the effect of mold on the warpage deformation of composite material under different fiber volume fractions. Then a mold–part interaction modeling method for RTM process with nonthermoelastic deformation is proposed. By introducing shear layers between the upper and lower surfaces of the mold and the composite part, a finite element simulation model for predicting the curing deformation of the component is established and experimentally verified. The results show that the effect of mold–part interaction on the warpage deformation of the composite decreases with increasing fiber volume fraction. Meanwhile, the proposed modeling method can avoid complete material characterization, and the comparison between experimental and simulation results proves that the model can accurately simulate the curing deformation of composite components under the same process conditions. Finally, the analysis reveals that the interaction caused by thermal mismatch between the composites and the mold is less related to the intermediate layup, but mainly related to the fiber orientation of the layup layer in contact with the mold. Highlights The warpage deformation law of the mold on the composites with different fiber volume fractions is investigated. A mold–part interaction modeling method for a resin transfer molding process with nonthermoelastic deformation is proposed, where the mold stretching effect is represented by the cumulative effect of the interaction between the two layers on the upper and lower surfaces of the part.

Förderung

  • Natural Science Foundation of Tianjin Municipality

Zitieren

APA

Zhang, C., Sun, Y., Xu, J., Shi, X., & Zhang, G. (2023). Effect of mold on curing deformation of resin transfer molding ‐made textile composites. Polymer Composites, 44(11), 7599-7610. https://doi.org/10.1002/pc.27648

Vancouver

Zhang C, Sun Y, Xu J, Shi X, Zhang G. Effect of mold on curing deformation of resin transfer molding ‐made textile composites. Polymer Composites. 2023;44(11):7599-7610. doi:10.1002/pc.27648

BibTeX
@article{Zhang2023,
  author = {Zhang, Ce and Sun, Ying and Xu, Jing and Shi, Xiaoping and Zhang, Guoli},
  title = {Effect of mold on curing deformation of resin transfer molding ‐made textile composites},
  journal = {Polymer Composites},
  year = {2023},
  volume = {44},
  number = {11},
  pages = {7599--7610},
  doi = {10.1002/pc.27648}
}
Kostenlos starten →