EUVIMEDOpdag EUVIMED
Crossref

Mode I and II interlaminar fracture toughness of glass/carbon inter‐ply hybrid FRP composites: Effects of stacking sequence and testing temperature

Srinivasu Dasari, Satyaroop Patnaik, Tanmay Bhattacharyya, Subrata Mukherjee, Bankim Chandra Ray, Rajesh Kumar Prusty

Polymer Composites · 2023-06 · 44 (6) · 3622-3633

DOI: 10.1002/pc.27349 ↗

At a glance

Journal article in Polymer Composites, published online on 2023-04-21. Written by Srinivasu Dasari and 5 co-authors. Cited 26 times so far (Crossref); 88 references. Funded by: Science and Engineering Research Board.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Even though laminated FRP composites show exceptional performance in various modes of loading, they are susceptible to delamination. The ambient temperature and elevated temperature delamination resistance of glass/carbon fiber interply hybrid composites were assessed via mode I and mode II interlaminar fracture toughness tests performed at 30, 50 and 70°C. Interply hybrid composites performed better than composites with single type of fiber. The fracture toughness of inter‐ply hybrid composites varied with the stacking position. At 30°C, mode I fracture toughness value of alternative glass and carbon fiber stacking sequence (G 1 C 1 ) 5 of hybrid composite showed 40% improvement over 10 layered carbon/epoxy (C 10 ) composite. Further, Mode II fracture toughness of C 5 G 5 composite showed 22% enhancement, and C 10 exhibited 42% improvement over 10‐layered glass/epoxy composite. Increasing the test temperature of all composites improved their G IC and G IIC values. The increment in the mode I fracture toughness properties of all composite was in the range of 5%–23% at 70°C from its room temperature value. The fractographic images of fractured samples were studied under a scanning electron microscope and failure mechanisms of composites were identified.

Funding

  • Science and Engineering Research Board

Cite

APA

Dasari, S., Patnaik, S., Bhattacharyya, T., Mukherjee, S., Ray, B. C., & Prusty, R. K. (2023). Mode I and II interlaminar fracture toughness of glass/carbon inter‐ply hybrid FRP composites: Effects of stacking sequence and testing temperature. Polymer Composites, 44(6), 3622-3633. https://doi.org/10.1002/pc.27349

Vancouver

Dasari S, Patnaik S, Bhattacharyya T, Mukherjee S, Ray BC, Prusty RK. Mode I and II interlaminar fracture toughness of glass/carbon inter‐ply hybrid FRP composites: Effects of stacking sequence and testing temperature. Polymer Composites. 2023;44(6):3622-3633. doi:10.1002/pc.27349

BibTeX
@article{Dasari2023,
  author = {Dasari, Srinivasu and Patnaik, Satyaroop and Bhattacharyya, Tanmay and Mukherjee, Subrata and Ray, Bankim Chandra and Prusty, Rajesh Kumar},
  title = {Mode I and II interlaminar fracture toughness of glass/carbon inter‐ply hybrid FRP composites: Effects of stacking sequence and testing temperature},
  journal = {Polymer Composites},
  year = {2023},
  volume = {44},
  number = {6},
  pages = {3622--3633},
  doi = {10.1002/pc.27349}
}
Start for free →