EUVIMEDOpdag EUVIMED
Crossref

Rapid Production Nasal Osteotomy Simulators With Multi‐Modality Manufacturing: 3D Printing, Casting, and Molding

Parker Tumlin, Ian Sunyecz, Ruifeng Cui, Mark Armeni, Monika E Freiser

Otolaryngology–Head and Neck Surgery · 2024

DOI: 10.1002/ohn.877 ↗

At a glance

Journal article in Otolaryngology–Head and Neck Surgery, 2024. Written by Parker Tumlin and 4 co-authors. Institution: Department of Otolaryngology, West Virginia University, Morgantown, West Virginia, USA. Major MEDLINE topics: Printing, Three-Dimensional, Osteotomy, Models, Anatomic, Simulation Training. Cited 1 times so far (Crossref); 15 references. Funded by: WVU department of otolaryngology.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Objective

To expand and improve upon previously described nasal osteotomy models with the goals of decreasing cost and production time while ensuring model fidelity. To assess change in participant confidence in their understanding of and ability to perform nasal osteotomies following completion of the simulation course. Study Design Prospective study.

Setting

Simulation training course for otolaryngology residents at West Virginia University.

Methods

A combined methodology of 3D printing, silicone molding, and resin casting was used to design a nasal osteotomy model to address material issues such as print delamination. Multiple models were then used in a simulation lab on performing nasal osteotomies. Model utility and impact on participant confidence was assessed at baseline, postlecture, and postsimulation lab.

Results

Using a combined manufacturing methodology, we achieved a production time reduction of 97.71% and a cost reduction of 82.02% for this polyurethane resin nasal osteotomy model relative to a previously described osteotomy model. Participants in the simulation course were noted to have a significant improvement in confidence in their understanding of and ability to perform nasal osteotomies from baseline and postlecture and also from postlecture and postsimulation lab ( P < .05 for all).

Conclusion

By incorporating multiple manufacturing modalities (molding and casting) in addition to 3D printing, this study achieved a large reduction in both production time and cost in fabrication of a nasal osteotomy simulator and addressed material limitations imposed by fused deposition modeling printers. This design methodology serves as an example on how these barriers may be addressed in unrelated simulation projects. Model fidelity was improved with addition of a silicone soft tissue midface. Improvement in participant confidence was noted following completion of the simulation lab.

Subjects

MeSH terms (MEDLINE)

Printing, Three-DimensionalOsteotomyModels, AnatomicSimulation TrainingHumansProspective StudiesInternship and ResidencyOtolaryngology

Author keywords

3D printingmedical educationosteotomyrhinoplastysurgical simulation

Authors and institutions

  • Department of Otolaryngology, West Virginia University, Morgantown, West Virginia, USA.

Funding

  • WVU department of otolaryngology

Cite

APA

Tumlin, P., Sunyecz, I., Cui, R., Armeni, M., & Freiser, M. E. (2024). Rapid Production Nasal Osteotomy Simulators With Multi‐Modality Manufacturing: 3D Printing, Casting, and Molding. Otolaryngology–Head and Neck Surgery. https://doi.org/10.1002/ohn.877

Vancouver

Tumlin P, Sunyecz I, Cui R, Armeni M, Freiser ME. Rapid Production Nasal Osteotomy Simulators With Multi‐Modality Manufacturing: 3D Printing, Casting, and Molding. Otolaryngology–Head and Neck Surgery. 2024. doi:10.1002/ohn.877

BibTeX
@article{Tumlin2024,
  author = {Tumlin, Parker and Sunyecz, Ian and Cui, Ruifeng and Armeni, Mark and Freiser, Monika E},
  title = {Rapid Production Nasal Osteotomy Simulators With Multi‐Modality Manufacturing: 3D Printing, Casting, and Molding},
  journal = {Otolaryngology–Head and Neck Surgery},
  year = {2024},
  doi = {10.1002/ohn.877}
}
Start for free →