Rapid Production Nasal Osteotomy Simulators With Multi‐Modality Manufacturing: 3D Printing, Casting, and Molding
Otolaryngology–Head and Neck Surgery · 2024
DOI: 10.1002/ohn.877 ↗Kurz gefasst
Fachartikel in der Zeitschrift Otolaryngology–Head and Neck Surgery, 2024. Verfasst von Parker Tumlin und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Otolaryngology, West Virginia University, Morgantown, West Virginia, USA. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Osteotomy, Models, Anatomic, Simulation Training. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 15 Literaturangaben. Gefördert von: WVU department of otolaryngology.
Abstract (Originalsprache)
Objective
To expand and improve upon previously described nasal osteotomy models with the goals of decreasing cost and production time while ensuring model fidelity. To assess change in participant confidence in their understanding of and ability to perform nasal osteotomies following completion of the simulation course. Study Design Prospective study.
Setting
Simulation training course for otolaryngology residents at West Virginia University.
Methods
A combined methodology of 3D printing, silicone molding, and resin casting was used to design a nasal osteotomy model to address material issues such as print delamination. Multiple models were then used in a simulation lab on performing nasal osteotomies. Model utility and impact on participant confidence was assessed at baseline, postlecture, and postsimulation lab.
Results
Using a combined manufacturing methodology, we achieved a production time reduction of 97.71% and a cost reduction of 82.02% for this polyurethane resin nasal osteotomy model relative to a previously described osteotomy model. Participants in the simulation course were noted to have a significant improvement in confidence in their understanding of and ability to perform nasal osteotomies from baseline and postlecture and also from postlecture and postsimulation lab ( P < .05 for all).
Conclusion
By incorporating multiple manufacturing modalities (molding and casting) in addition to 3D printing, this study achieved a large reduction in both production time and cost in fabrication of a nasal osteotomy simulator and addressed material limitations imposed by fused deposition modeling printers. This design methodology serves as an example on how these barriers may be addressed in unrelated simulation projects. Model fidelity was improved with addition of a silicone soft tissue midface. Improvement in participant confidence was noted following completion of the simulation lab.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Otolaryngology, West Virginia University, Morgantown, West Virginia, USA.
Förderung
- WVU department of otolaryngology
Zitieren
APA
Tumlin, P., Sunyecz, I., Cui, R., Armeni, M., & Freiser, M. E. (2024). Rapid Production Nasal Osteotomy Simulators With Multi‐Modality Manufacturing: 3D Printing, Casting, and Molding. Otolaryngology–Head and Neck Surgery. https://doi.org/10.1002/ohn.877
Vancouver
Tumlin P, Sunyecz I, Cui R, Armeni M, Freiser ME. Rapid Production Nasal Osteotomy Simulators With Multi‐Modality Manufacturing: 3D Printing, Casting, and Molding. Otolaryngology–Head and Neck Surgery. 2024. doi:10.1002/ohn.877
BibTeX
@article{Tumlin2024,
author = {Tumlin, Parker and Sunyecz, Ian and Cui, Ruifeng and Armeni, Mark and Freiser, Monika E},
title = {Rapid Production Nasal Osteotomy Simulators With Multi‐Modality Manufacturing: 3D Printing, Casting, and Molding},
journal = {Otolaryngology–Head and Neck Surgery},
year = {2024},
doi = {10.1002/ohn.877}
}
EUVIMED