EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D effects of seawater on electrical resistivity tomography near shorelines—Challenges and possible solutions inferred from synthetic and field data

Simon Levin Fischer, Ercan Erkul, Jasper Justus Lutz Hoffmann, Şerif Barış, Ertan Pekşen, İsmail Kaplanvural, Wolfgang Rabbel

Near Surface Geophysics · 2026-08 · 24 (4) · 364-391

DOI: 10.1002/nsg.70063 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Near Surface Geophysics, online erschienen am 07.06.2026. Verfasst von Simon Levin Fischer und 6 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Erasmus+, H2020 Marie Skłodowska-Curie Actions.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrical resistivity tomography (ERT) is one of the most widely used geophysical techniques for hydrogeological questions, such as investigating the groundwater transition zone between land and sea. The interpretation of 2D coast‐parallel ERT profiles is challenging because most of the electrical current flows through the highly conductive seawater and not the ground beneath the profile. We study this effect using synthetic data and a field data example and propose an approach for improved evaluation of coast‐parallel geoelectric profiles. The synthetic study shows that the impact of the seawater on apparent resistivities is negligible (errors below 1.5%) only if the distance between current injection electrodes ( a ) is equal to or smaller than the distance ( d ) between ERT profile and shoreline (). Ignoring this criterion, standard 2D geoelectric inversion results may diverge by 50% from the actual resistivity distribution at depths of . To improve the inversion also for profiles with we tested an approach to consider the seawater effect through a correction factor applied to the measured apparent resistivity values prior to the inversion. The correction factor depends on , the seafloor slope and the resistivity ratio of seawater and average underground. We present an analytical function approximating the correction factor well for seafloor slopes up to 10° and seawater‐to‐average‐land resistivity ratios of 0.040–0.002. We found that this approach is effective at removing errors in apparent resistivities for . Inversion results then show more reliable resistivities up to relative depths of . We applied the correction approach to field data from a coast‐parallel profile at Konyaaltı Beach (Antalya, Türkiye). The field study demonstrates the importance of considering the seawater effect to interpret possible locations of fresh submarine groundwater discharges and saltwater intrusions. It also shows the practical applicability of the new correction approach.

Förderung

  • Erasmus+
  • H2020 Marie Skłodowska-Curie Actions

Zitieren

APA

Fischer, S. L., Erkul, E., Hoffmann, J. J. L., Barış, Ş., Pekşen, E., Kaplanvural, İ., & Rabbel, W. (2026). 3D effects of seawater on electrical resistivity tomography near shorelines—Challenges and possible solutions inferred from synthetic and field data. Near Surface Geophysics, 24(4), 364-391. https://doi.org/10.1002/nsg.70063

Vancouver

Fischer SL, Erkul E, Hoffmann JJL, Barış Ş, Pekşen E, Kaplanvural İ, et al. 3D effects of seawater on electrical resistivity tomography near shorelines—Challenges and possible solutions inferred from synthetic and field data. Near Surface Geophysics. 2026;24(4):364-391. doi:10.1002/nsg.70063

BibTeX
@article{Fischer2026,
  author = {Fischer, Simon Levin and Erkul, Ercan and Hoffmann, Jasper Justus Lutz and Barış, Şerif and Pekşen, Ertan and Kaplanvural, İsmail and Rabbel, Wolfgang},
  title = {3D effects of seawater on electrical resistivity tomography near shorelines—Challenges and possible solutions inferred from synthetic and field data},
  journal = {Near Surface Geophysics},
  year = {2026},
  volume = {24},
  number = {4},
  pages = {364--391},
  doi = {10.1002/nsg.70063}
}
Kostenlos starten →