3D printing‐based frugal manufacturing of glass pipettes for minimally invasive delivery of therapeutics to the brain
Neuroprotection · 2023
DOI: 10.1002/nep3.20 ↗Kurz gefasst
Fachartikel in der Zeitschrift Neuroprotection, 2023. Verfasst von Guanda Qiao und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Diagnostic Radiology and Nuclear Medicine, University of Maryland School of Medicine, Baltimore, Maryland, USA. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: NINDS NIH HHS, NIA NIH HHS, NIH HHS.
Abstract (Originalsprache)
Objective
Intracerebral delivery of agents in liquid form is usually achieved through commercially available and durable metal needles. However, their size and texture may contribute to mechanical brain damage. Glass pipettes with a thin tip may significantly reduce injection‐associated brain damage but require access to prohibitively expensive programmable pipette pullers. This study is to remove the economic barrier to the application of minimally invasive delivery of therapeutics to the brain, such as chemical compounds, viral vectors, and cells.
Methods
We took advantage of the rapid development of free educational online resources and emerging low‐cost 3D printers by designing an affordable pipette puller (APP) to remove the cost obstacle.
Results
We showed that our APP could produce glass pipettes with a sharp tip opening down to 20 μm or less, which is sufficiently thin for the delivery of therapeutics into the brain. A pipeline from pipette pulling to brain injection using low‐cost and open‐source equipment was established to facilitate the application of the APP.
Conclusion
In the spirit of frugal science, our device may democratize glass pipette‐puling and substantially promote the application of minimally invasive and precisely controlled delivery of therapeutics to the brain for finding more effective therapies of brain diseases.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Diagnostic Radiology and Nuclear Medicine, University of Maryland School of Medicine, Baltimore, Maryland, USA.
- Laboratory of Molecular Cardiology, Department of Physiology, Center for Biomedical Engineering and Technology, University of Maryland School of Medicine, Baltimore, Maryland, USA.
ORCID-Profile: Yajie Liang
Förderung
- NINDS NIH HHS
- NIA NIH HHS
- NIH HHS
Zitieren
APA
Qiao, G., Gulisashvili, D., Jablonska, A., Zhao, G., Janowski, M., Walczak, P., & Liang, Y. (2023). 3D printing‐based frugal manufacturing of glass pipettes for minimally invasive delivery of therapeutics to the brain. Neuroprotection. https://doi.org/10.1002/nep3.20
Vancouver
Qiao G, Gulisashvili D, Jablonska A, Zhao G, Janowski M, Walczak P, et al. 3D printing‐based frugal manufacturing of glass pipettes for minimally invasive delivery of therapeutics to the brain. Neuroprotection. 2023. doi:10.1002/nep3.20
BibTeX
@article{Qiao2023,
author = {Qiao, Guanda and Gulisashvili, David and Jablonska, Anna and Zhao, Guiling and Janowski, Miroslaw and Walczak, Piotr and Liang, Yajie},
title = {3D printing‐based frugal manufacturing of glass pipettes for minimally invasive delivery of therapeutics to the brain},
journal = {Neuroprotection},
year = {2023},
doi = {10.1002/nep3.20}
}
EUVIMED