EUVIMEDEUVIMED entdecken
Crossref

3D Plastronics Culture Chambers and Benchtop MRI Setup Toward Tissue Engineering Applications

Valernst Martial Gilmus iD, Yilbert Gimenez, Tony Gerges, Philippe Lombard, Vincent Semet, Christophe Marquette, Emma Petiot, Michel Cabrera, Simon Auguste Lambert

NMR in Biomedicine · 2026-05 · 39 (5)

DOI: 10.1002/nbm.70272 ↗

Kurz gefasst

Fachartikel in der Zeitschrift NMR in Biomedicine, online erschienen am 29.03.2026. Verfasst von Valernst Martial Gilmus und 8 weiteren Autor:innen. Beteiligte Einrichtung: Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, Ecole Centrale de Lyon, CNRS, Ampère, UMR5005, Villeurbanne, France. Hauptthemen laut MEDLINE: Tissue Engineering, Magnetic Resonance Imaging, Printing, Three-Dimensional, Imaging, Three-Dimensional. Die Arbeit nennt 50 Literaturangaben. Gefördert von: Agence Nationale de la Recherche, Centre National de la Recherche Scientifique, Université Claude Bernard Lyon 1.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rise of low‐field benchtop MRI offers exciting opportunities for non‐invasive, volumetric imaging of large biofabricated tissues in standard tissue engineering labs. Although low‐field benchtop MRI scanners provide a cost‐effective and accessible option, their performance is often restricted by low signal‐to‐noise ratio (SNR) and the use of generic, non‐optimized hardware. This study introduces a novel, fully integrated benchtop MRI setup for in situ imaging of 3D bioprinted constructs. A custom perfusion culture chamber was designed and fabricated using 3D Plastronics, a method that allows for the direct integration of a bridged loop‐gap resonator (BLGR) onto the chamber's surface. The performance of this integrated setup was quantitatively compared to a conventional setup using a commercial, all‐purpose coil. The evaluation included measurements of the quality factor (Q), noise factor (F), SNR, and B 1 + field mapping. The practical application was demonstrated by high‐resolution imaging of a 3D bioprinted hydrogel scaffold under perfusion. The 3D Plastronics setup demonstrated superior performance over the commercial coil setup, achieving a 60% increase in measured SNR, which was consistent with theoretical predictions. This improvement was attributed mainly to a higher filling factor due to the coil's proximity to the sample, enabled by the 3D Plastronics approach. B 1 + field maps also indicated higher mean field strength and improved homogeneity for the integrated coil due to its optimized design. High‐resolution (234 m 3 ) images of the bioprinted scaffold clearly displayed its internal macroporous structure, in 20 min. Integrating radio frequency (RF) coils directly onto a culture chamber with 3D Plastronics greatly enhances imaging performance in low‐field MRI for tissue engineering. This method offers a scalable, customizable platform for nondestructive, long‐term monitoring of 3D tissue constructs and opens new possibilities for in situ studies of tissue development.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue EngineeringMagnetic Resonance ImagingPrinting, Three-DimensionalImaging, Three-DimensionalCell Culture Techniques, Three DimensionalSignal-To-Noise RatioAnimalsTissue ScaffoldsEquipment Design

Stichwörter der Autor:innen

3D plastronicsbenchtop MRIlow‐fieldtissue engineering

Autor:innen und Institutionen

  • Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, Ecole Centrale de Lyon, CNRS, Ampère, UMR5005, Villeurbanne, France.
  • 3d.FAB, ICBMS, Univ Lyon 1, Villeurbanne, France.

ORCID-Profile: Valernst Martial Gilmus

Förderung

  • Agence Nationale de la Recherche
  • Centre National de la Recherche Scientifique
  • Université Claude Bernard Lyon 1

Zitieren

APA

Gilmus, V. M., Gimenez, Y., Gerges, T., Lombard, P., Semet, V., Marquette, C., Petiot, E., Cabrera, M., & Lambert, S. A. (2026). 3D Plastronics Culture Chambers and Benchtop MRI Setup Toward Tissue Engineering Applications. NMR in Biomedicine, 39(5). https://doi.org/10.1002/nbm.70272

Vancouver

Gilmus VM, Gimenez Y, Gerges T, Lombard P, Semet V, Marquette C, et al. 3D Plastronics Culture Chambers and Benchtop MRI Setup Toward Tissue Engineering Applications. NMR in Biomedicine. 2026;39(5). doi:10.1002/nbm.70272

BibTeX
@article{Gilmus2026,
  author = {Gilmus, Valernst Martial and Gimenez, Yilbert and Gerges, Tony and Lombard, Philippe and Semet, Vincent and Marquette, Christophe and Petiot, Emma and Cabrera, Michel and Lambert, Simon Auguste},
  title = {3D Plastronics Culture Chambers and Benchtop MRI Setup Toward Tissue Engineering Applications},
  journal = {NMR in Biomedicine},
  year = {2026},
  volume = {39},
  number = {5},
  doi = {10.1002/nbm.70272}
}
Kostenlos starten →