Three‐Dimensional Nanoprinting of High Numerical Aperture Multilayer Diffractive Microlens for Miniaturized Fibre Imaging
Nanophotonics · 25.11.2026 · 15 (22)
DOI: 10.1002/nap2.70376 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanophotonics, online erschienen am 18.11.2026. Verfasst von Chao Meng und 13 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
High–numerical‐aperture (NA) fibre‐integrated microlenses are critical for minimally invasive bioimaging, yet remain challenging due to the computational complexity of inverse design and the mechanical fragility of multilayer diffractive nanostructures. Here, we report three‐dimensional multilayer diffractive microlenses (MLDMs) directly nanoprinted onto fibre facets for high‐performance miniaturized imaging. An efficient vectorial Debye‐integral‐based optimization framework is developed to enable rapid inverse design of high‐NA multilayer structures, reducing the optimization time to minutes while maintaining high accuracy. To address fabrication challenges, a three‐step solvent‐exchange strategy is introduced to suppress capillary‐force‐induced collapse and preserve structural integrity. The optimized three‐layer MLDM has a designed numerical aperture of 0.78 and experimentally produces a tightly focused optical spot with a full width at half maximum (FWHM) of 1.2 μm. When integrated onto a 150 μm‐diameter multicore fibre, the device enables target imaging process with a field of view of ∼50 μm, significantly exceeding previous multilayer implementations. The results reveal that multilayer diffractive integration provides enhanced wavefront control and improved light confinement compared to single‐layer designs. This work establishes a scalable route for high‐NA fibre‐end optics and paves the way toward ultracompact fiber imaging systems.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Meng, C., Ding, H., Luan, G., Sun, Y., Sun, W., Guo, Y., Xin, W., Zhang, J., Zhang, X., Chen, X., Zhang, Q., Gu, M., Lamon, S., & Yu, H. (2026). Three‐Dimensional Nanoprinting of High Numerical Aperture Multilayer Diffractive Microlens for Miniaturized Fibre Imaging. Nanophotonics, 15(22). https://doi.org/10.1002/nap2.70376
Vancouver
Meng C, Ding H, Luan G, Sun Y, Sun W, Guo Y, et al. Three‐Dimensional Nanoprinting of High Numerical Aperture Multilayer Diffractive Microlens for Miniaturized Fibre Imaging. Nanophotonics. 2026;15(22). doi:10.1002/nap2.70376
BibTeX
@article{Meng2026,
author = {Meng, Chao and Ding, Haibo and Luan, Guangrui and Sun, Yipin and Sun, Weijun and Guo, Yuting and Xin, Wei and Zhang, Jiayue and Zhang, Xiaoxiang and Chen, Xinhong and Zhang, Qiming and Gu, Min and Lamon, Simone and Yu, Haoyi},
title = {Three‐Dimensional Nanoprinting of High Numerical Aperture Multilayer Diffractive Microlens for Miniaturized Fibre Imaging},
journal = {Nanophotonics},
year = {2026},
volume = {15},
number = {22},
doi = {10.1002/nap2.70376}
}
EUVIMED