EUVIMEDEUVIMED entdecken
Open Access

3D-printed multilayer structures for high–numerical aperture achromatic metalenses

Cheng-Feng Pan iD, Hao Wang iD, Hongtao Wang iD, Parvathi Nair S iD, Qifeng Ruan iD, Simon Wredh iD, Yujie Ke iD, John You En Chan, Wang Zhang iD, Cheng-Wei Qiu iD, Joel K W Yang iD

Science Advances · 22.12.2023 · 9 (51)

DOI: 10.1126/sciadv.adj9262 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Science Advances, erschienen am 22.12.2023. Verfasst von Cheng-Feng Pan und 10 weiteren Autor:innen. Beteiligte Einrichtung: Engineering Product Development, Singapore University of Technology and Design, Singapore 487372, Singapore. Die Arbeit wurde bisher 121-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flat optics consisting of nanostructures of high–refractive index materials produce lenses with thin form factors that tend to operate only at specific wavelengths. Recent attempts to achieve achromatic lenses uncover a trade-off between the numerical aperture (NA) and bandwidth, which limits performance. Here, we propose a new approach to design high-NA, broadband, and polarization-insensitive multilayer achromatic metalenses (MAMs). We combine topology optimization and full-wave simulations to inversely design MAMs and fabricate the structures in low–refractive index materials by two-photon polymerization lithography. MAMs measuring 20 μm in diameter operating in the visible range of 400 to 800 nm with 0.5 and 0.7 NA were achieved with efficiencies of up to 42%. We demonstrate broadband imaging performance of the fabricated MAM under white light and RGB narrowband illuminations. These results highlight the potential of the 3D-printed multilayer structures for realizing broadband and multifunctional meta-devices with inverse design.

Autor:innen und Institutionen

  • Engineering Product Development, Singapore University of Technology and Design, Singapore 487372, Singapore.
  • Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576, Singapore.
  • College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China.
  • Greater Bay Area Institute for Innovation, Hunan University, Guangzhou 511300, China.
  • Institute of Materials Research and Engineering, A*STAR (Agency for Science Technology and Research), Singapore 138634, Singapore.
  • Ministry of Industry and Information Technology Key Lab of Micro-Nano Optoelectronic Information System, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.

ORCID-Profile: Cheng-Feng Pan, Hao Wang, Hongtao Wang, Parvathi Nair S, Qifeng Ruan, Simon Wredh, Yujie Ke, Wang Zhang, Cheng-Wei Qiu, Joel K W Yang

Zitieren

APA

Pan, C. F., Wang, H., Wang, H., S, P. N., Ruan, Q., Wredh, S., Ke, Y., Chan, J. Y. E., Zhang, W., Qiu, C. W., & Yang, J. K. W. (2023). 3D-printed multilayer structures for high–numerical aperture achromatic metalenses. Science Advances, 9(51). https://doi.org/10.1126/sciadv.adj9262

Vancouver

Pan CF, Wang H, Wang H, S PN, Ruan Q, Wredh S, et al. 3D-printed multilayer structures for high–numerical aperture achromatic metalenses. Science Advances. 2023;9(51). doi:10.1126/sciadv.adj9262

BibTeX
@article{Pan2023,
  author = {Pan, Cheng-Feng and Wang, Hao and Wang, Hongtao and S, Parvathi Nair and Ruan, Qifeng and Wredh, Simon and Ke, Yujie and Chan, John You En and Zhang, Wang and Qiu, Cheng-Wei and Yang, Joel K W},
  title = {3D-printed multilayer structures for high–numerical aperture achromatic metalenses},
  journal = {Science Advances},
  year = {2023},
  volume = {9},
  number = {51},
  doi = {10.1126/sciadv.adj9262}
}
Kostenlos starten →