EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles

Jingyu Hou, Shaopu Yang, Qiang Li, Yongqiang Liu, Jiujian Wang

International Journal of Mechanical System Dynamics · 2021-09 · 1 (1) · 143-156

DOI: 10.1002/msd2.12003 ↗

At a glance

Journal article in International Journal of Mechanical System Dynamics, published online on 2021-11-29. Written by Jingyu Hou and 4 co-authors. Cited 16 times so far (Crossref); 26 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Natural Science Foundation of China, Natural Science Foundation of Hebei Province.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

An improved variable cross‐section cantilever beam model for evaluating the time‐varying mesh stiffness (TVMS) of the perfect gear tooth is developed in which the tooth number of driving gear is less than 42 and that of driven is more than 42. The TVMS obtained by the proposed method is compared with the result without considering the misalignment between the base circle and gear root. Four types of root crack models and changes in TVMS of 13‐crack levels are presented. The fault vibration characteristic of a single‐stage spur gear reducer with root crack is analyzed and the correctness is qualitatively verified by the vibration signals of an experimental gearbox with crack or missing failure. The results presented in this paper are of great significance for a deep understanding of the possible causes of vibration and noise of gears and provide a theoretical foundation for the fault diagnosis of the gearbox.

Funding

  • National Natural Science Foundation of China
  • Natural Science Foundation of Hebei Province

Cite

APA

Hou, J., Yang, S., Li, Q., Liu, Y., & Wang, J. (2021). Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles. International Journal of Mechanical System Dynamics, 1(1), 143-156. https://doi.org/10.1002/msd2.12003

Vancouver

Hou J, Yang S, Li Q, Liu Y, Wang J. Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles. International Journal of Mechanical System Dynamics. 2021;1(1):143-156. doi:10.1002/msd2.12003

BibTeX
@article{Hou2021,
  author = {Hou, Jingyu and Yang, Shaopu and Li, Qiang and Liu, Yongqiang and Wang, Jiujian},
  title = {Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles},
  journal = {International Journal of Mechanical System Dynamics},
  year = {2021},
  volume = {1},
  number = {1},
  pages = {143--156},
  doi = {10.1002/msd2.12003}
}
Start for free →