Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles
International Journal of Mechanical System Dynamics · 2021-09 · 1 (1) · 143-156
DOI: 10.1002/msd2.12003 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Mechanical System Dynamics, online erschienen am 29.11.2021. Verfasst von Jingyu Hou und 4 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hebei Province.
Abstract (Originalsprache)
An improved variable cross‐section cantilever beam model for evaluating the time‐varying mesh stiffness (TVMS) of the perfect gear tooth is developed in which the tooth number of driving gear is less than 42 and that of driven is more than 42. The TVMS obtained by the proposed method is compared with the result without considering the misalignment between the base circle and gear root. Four types of root crack models and changes in TVMS of 13‐crack levels are presented. The fault vibration characteristic of a single‐stage spur gear reducer with root crack is analyzed and the correctness is qualitatively verified by the vibration signals of an experimental gearbox with crack or missing failure. The results presented in this paper are of great significance for a deep understanding of the possible causes of vibration and noise of gears and provide a theoretical foundation for the fault diagnosis of the gearbox.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Hebei Province
Zitieren
APA
Hou, J., Yang, S., Li, Q., Liu, Y., & Wang, J. (2021). Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles. International Journal of Mechanical System Dynamics, 1(1), 143-156. https://doi.org/10.1002/msd2.12003
Vancouver
Hou J, Yang S, Li Q, Liu Y, Wang J. Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles. International Journal of Mechanical System Dynamics. 2021;1(1):143-156. doi:10.1002/msd2.12003
BibTeX
@article{Hou2021,
author = {Hou, Jingyu and Yang, Shaopu and Li, Qiang and Liu, Yongqiang and Wang, Jiujian},
title = {Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles},
journal = {International Journal of Mechanical System Dynamics},
year = {2021},
volume = {1},
number = {1},
pages = {143--156},
doi = {10.1002/msd2.12003}
}
EUVIMED