EUVIMEDEUVIMED entdecken
Crossref

3D Printing of Subject‐Specific Passive Shims for In Vivo Small‐Animal Magnetic Resonance Imaging

An Vanduffel iD, Cesar Parra-Cabrera, Hanne Vanduffel, Quentin Goudard, Kasia Błażejczyk, Shannon Helsper, Uwe Himmelreich iD, Dimitrios Sakellariou, Rob Ameloot

Magnetic Resonance in Medicine · 2026

DOI: 10.1002/mrm.70520 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Magnetic Resonance in Medicine, 2026. Verfasst von An Vanduffel und 8 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Membrane Separations, Adsorption, Catalysis and Spectroscopy (cMACS), KU Leuven, Leuven, Belgium. Hauptthemen laut MEDLINE: Magnetic Resonance Imaging, Printing, Three-Dimensional, Brain, Image Processing, Computer-Assisted. Die Arbeit nennt 35 Literaturangaben. Gefördert von: Fonds Wetenschappelijk Onderzoek, KU Leuven, Agentschap Innoveren en Ondernemen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

Magnetic resonance imaging (MRI) is a non‐invasive method that relies on a highly homogeneous B 0 magnetic field to generate high‐quality images. However, subject‐specific inhomogeneities, induced by magnetic susceptibility differences, can degrade image quality and cause artifacts and are often inadequately corrected by traditional active or passive shimming methods. This work aims to create a new passive shimming method to overcome these problems.

Method

This study introduces an innovative approach to developing custom, subject‐specific passive shims 3D‐printed with a binder and a ferromagnetic ink. The optimal spatial distribution and concentration of ferromagnetic material within the shim are calculated using a custom algorithm that minimizes the magnetic field standard deviation.

Results

The shim design and fabrication process is demonstrated for in vivo passive shimming of a rat brain, yielding a 21% improvement in magnetic field homogeneity and improved image quality in spin‐echo echo‐planar imaging scans, with a 65% increase in the Dice‐Sørensen similarity coefficient.

Conclusion

This approach highlights the potential of combining computational optimization with additive manufacturing for effective, subject‐specific passive shimming in MRI.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Magnetic Resonance ImagingPrinting, Three-DimensionalBrainImage Processing, Computer-AssistedAnimalsRatsAlgorithmsPhantoms, ImagingEcho-Planar ImagingArtifacts

Stichwörter der Autor:innen

3D printingecho‐planar imaging (EPI)in vivomagnetic resonance imaging (MRI)passive shimming

Autor:innen und Institutionen

  • Centre for Membrane Separations, Adsorption, Catalysis and Spectroscopy (cMACS), KU Leuven, Leuven, Belgium.
  • Biomedical MRI, Department of Imaging & Pathology, KU Leuven, Leuven, Belgium.

ORCID-Profile: An Vanduffel, Uwe Himmelreich

Förderung

  • Fonds Wetenschappelijk Onderzoek
  • KU Leuven
  • Agentschap Innoveren en Ondernemen

Zitieren

APA

Vanduffel, A., Parra-Cabrera, C., Vanduffel, H., Goudard, Q., Błażejczyk, K., Helsper, S., Himmelreich, U., Sakellariou, D., & Ameloot, R. (2026). 3D Printing of Subject‐Specific Passive Shims for In Vivo Small‐Animal Magnetic Resonance Imaging. Magnetic Resonance in Medicine. https://doi.org/10.1002/mrm.70520

Vancouver

Vanduffel A, Parra-Cabrera C, Vanduffel H, Goudard Q, Błażejczyk K, Helsper S, et al. 3D Printing of Subject‐Specific Passive Shims for In Vivo Small‐Animal Magnetic Resonance Imaging. Magnetic Resonance in Medicine. 2026. doi:10.1002/mrm.70520

BibTeX
@article{Vanduffel2026,
  author = {Vanduffel, An and Parra-Cabrera, Cesar and Vanduffel, Hanne and Goudard, Quentin and Błażejczyk, Kasia and Helsper, Shannon and Himmelreich, Uwe and Sakellariou, Dimitrios and Ameloot, Rob},
  title = {3D Printing of Subject‐Specific Passive Shims for In Vivo Small‐Animal Magnetic Resonance Imaging},
  journal = {Magnetic Resonance in Medicine},
  year = {2026},
  doi = {10.1002/mrm.70520}
}
Kostenlos starten →