EUVIMEDScopri EUVIMED
Crossref

High‐Q Narrowband Filter Realized by CNC Fabrication With Low Frequency Offset

Ziyao Gong, Xiaojian Zhang, Xiaochi Lu, Hao Yang, Xianjin Deng, Jun Jiang

Microwave and Optical Technology Letters · 2026-07 · 68 (7)

DOI: 10.1002/mop.70714 ↗

At a glance

Journal article in Microwave and Optical Technology Letters, published online on 2026-07-08. Written by Ziyao Gong and 5 co-authors. 12 references. Funded by: National Basic Research Program of China, National Natural Science Foundation of China.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

A high Q narrowband THz bandpass filter structure for computer numerical control (CNC) milling is proposed in this letter. The proposed filter employs a TM330 rectangular over‐mode cavity (ROMC) to lift the mode degeneracy. By introducing a novel coupling structure and feeding scheme, the target mode is decoupled and reconstructed, thereby achieving spurious suppression in the stopband while mitigating the impact of CNC fabrication tolerances on the center frequency shift. The results indicate that the proposed filter has a fractional bandwidth (FBW) of 0.23% at the center frequency of 220.5 GHz. The fabricated filter demonstrates an insertion loss (IL) of 2.8 dB, a return loss (RL) of 17 dB with the passband, and a center frequency offset as low as 200 MHz. The unloaded Q factor ( Q u ) extracted from the measurement results can reach 1500. This is the terahertz bandpass narrowband filter with the smallest fractional bandwidth, the smallest frequency offset under the same standard definition, and the highest unloaded Q factor among reported literature at present. The design structure of this work has application potential for low‐cost, modular high‐frequency high‐ Q narrowband filter design.

Funding

  • National Basic Research Program of China
  • National Natural Science Foundation of China

Cite

APA

Gong, Z., Zhang, X., Lu, X., Yang, H., Deng, X., & Jiang, J. (2026). High‐Q Narrowband Filter Realized by CNC Fabrication With Low Frequency Offset. Microwave and Optical Technology Letters, 68(7). https://doi.org/10.1002/mop.70714

Vancouver

Gong Z, Zhang X, Lu X, Yang H, Deng X, Jiang J. High‐Q Narrowband Filter Realized by CNC Fabrication With Low Frequency Offset. Microwave and Optical Technology Letters. 2026;68(7). doi:10.1002/mop.70714

BibTeX
@article{Gong2026,
  author = {Gong, Ziyao and Zhang, Xiaojian and Lu, Xiaochi and Yang, Hao and Deng, Xianjin and Jiang, Jun},
  title = {High‐Q Narrowband Filter Realized by CNC Fabrication With Low Frequency Offset},
  journal = {Microwave and Optical Technology Letters},
  year = {2026},
  volume = {68},
  number = {7},
  doi = {10.1002/mop.70714}
}
Start for free →