EUVIMEDEUVIMED entdecken
Crossref

Effect of severe quenching on hardness of commercially pure aluminium in correlation to structural changes

J. Maity, A. Pal, B. Hazra, V. E. Benjamin, M. Saha, R. Kumari, P. Anand, A. K. L. Das

Materialwissenschaft und Werkstofftechnik · 2026-02 · 57 (2) · 167-178

DOI: 10.1002/mawe.70092 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materialwissenschaft und Werkstofftechnik, online erschienen am 11.03.2026. Verfasst von J. Maity und 7 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Typical non‐conventional routes of severe quenching treatment, both cyclic quenching from room temperature up to 4 cycles and single time quenching from 600 °C after short‐duration (5 min) holding using liquid nitrogen as the quenchant, has been adopted on an initially annealed commercially pure aluminium. The grain refinement effect is observed for single time quenching from 600 °C; but not for cyclic quenching from room temperature. Lattice strain is found to be accumulated up to 2 cycles followed by a decline to a consistent lower value for 3 and 4 cycles in the specimens subjected to cyclic quenching treatment. The specimen, single time quenched from higher temperature (600 °C), exhibits much higher lattice strain as compared to all cyclic quenched specimens. The accumulation of lattice strain is found to be consistent with the evolution of regions of extremely low misorientation angle in the aluminium matrix. As a result of significantly high lattice strain generation and grain refinement effects, the hardness of commercially pure aluminium is substantially enhanced to 88 HV 10 on execution of single time liquid nitrogen quenching from 600 °C after short‐duration (5 min) holding; while compared with an initial hardness of 36 HV 10 in annealed condition.

Zitieren

APA

Maity, J., Pal, A., Hazra, B., Benjamin, V. E., Saha, M., Kumari, R., Anand, P., & Das, A. K. L. (2026). Effect of severe quenching on hardness of commercially pure aluminium in correlation to structural changes. Materialwissenschaft und Werkstofftechnik, 57(2), 167-178. https://doi.org/10.1002/mawe.70092

Vancouver

Maity J, Pal A, Hazra B, Benjamin VE, Saha M, Kumari R, et al. Effect of severe quenching on hardness of commercially pure aluminium in correlation to structural changes. Materialwissenschaft und Werkstofftechnik. 2026;57(2):167-178. doi:10.1002/mawe.70092

BibTeX
@article{Maity2026,
  author = {Maity, J. and Pal, A. and Hazra, B. and Benjamin, V. E. and Saha, M. and Kumari, R. and Anand, P. and Das, A. K. L.},
  title = {Effect of severe quenching on hardness of commercially pure aluminium in correlation to structural changes},
  journal = {Materialwissenschaft und Werkstofftechnik},
  year = {2026},
  volume = {57},
  number = {2},
  pages = {167--178},
  doi = {10.1002/mawe.70092}
}
Kostenlos starten →