EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Correlation of Hardness Test Methods with Tensile Properties of Structural Steels

Yi Xiao, Zhiyuan Fang, Wai Myo Htet, James Lim, Kaveh Andisheh

ce/papers · 2026-09 · 9 (2-3) · 40-47

DOI: 10.1002/cepa.70803 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Yi Xiao und 4 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hardness testing is widely used as a rapid indicator of steel strength; however, limited studies have examined hardness variation within structural steel sections or compared the suitability of different hardness methods for estimating tensile properties. This study investigated the relationships between hardness, tensile properties, and surface condition in structural steels using Rockwell, Vickers, Brinell, and Leeb tests. A total of 36 coupons were prepared from 300‐grade I‐section steel and 350‐grade square hollow section steel, including web, flange, and hollow section specimens. Tensile tests were used to determine yield strength and ultimate tensile strength, and surface roughness was measured after polishing. All four methods identified differences among specimen groups and local positions. Flange specimens consistently showed the lowest hardness, while web and square hollow section specimens showed higher values. Hardness in the web also varied with location, with lower values near the top and higher values in the middle regions. Surface roughness ranged from 0.108 to 0.361 μm and showed no clear monotonic relationship with hardness. Leeb hardness showed the strongest correlation with yield strength, while Vickers showed the strongest correlation with ultimate tensile strength. Hardness testing is therefore useful for rapid assessment of local mechanical variation in structural steel, but tensile property prediction requires method‐specific calibration.

Zitieren

APA

Xiao, Y., Fang, Z., Htet, W. M., Lim, J., & Andisheh, K. (2026). Correlation of Hardness Test Methods with Tensile Properties of Structural Steels. ce/papers, 9(2-3), 40-47. https://doi.org/10.1002/cepa.70803

Vancouver

Xiao Y, Fang Z, Htet WM, Lim J, Andisheh K. Correlation of Hardness Test Methods with Tensile Properties of Structural Steels. ce/papers. 2026;9(2-3):40-47. doi:10.1002/cepa.70803

BibTeX
@article{Xiao2026,
  author = {Xiao, Yi and Fang, Zhiyuan and Htet, Wai Myo and Lim, James and Andisheh, Kaveh},
  title = {Correlation of Hardness Test Methods with Tensile Properties of Structural Steels},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {40--47},
  doi = {10.1002/cepa.70803}
}
Kostenlos starten →