EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Digital Printing of Photoreversible Protective Films

Morris Wolf iD, Alper Balkan iD, René Schneider iD, Stefan Mommer iD, Yves Leterrier iD, Mark W Tibbitt iD

Macromolecular Rapid Communications · 2026

DOI: 10.1002/marc.70408 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2026. Verfasst von Morris Wolf und 5 weiteren Autor:innen. Beteiligte Einrichtung: Macromolecular Engineering Laboratory, ETH Zurich, Zürich, Switzerland. Hauptthemen laut MEDLINE: Polymers, Acrylates, Printing. Die Arbeit nennt 83 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Temporary protective coatings are widely used in modern production processes. Yet, while highly desirable, their high‐resolution printing and stimuli‐responsive removal remain challenging. To address this need, we introduce acrylate‐based photopolymerized and photoreversible protective films that can be applied using aerosol jet printing. The acrylate films were formulated using aqueous solutions of a photocleavable diacrylate cross‐linker and acrylated macromers. To form films, the precursor solution was cured with 405 nm light for 120 s. The films were subsequently removed via photodegradation upon exposure to 365 nm light within minutes to hours depending on film thickness and light intensity. The addition of a polyethyleneimine‐based adhesion promoter, Lupasol WF, led to significant improvement of adhesion to industry‐relevant surfaces. Quantification using a rheometer in extensional mode showed a fracture energy of the films 3.25x higher than without the adhesion promoter. The protective films were applied using aerosol jet printing, enabling a feature resolution below 30 µm and a spatially selective treatment of metallic surfaces with Paris oxide. These results demonstrate how photopolymerized and photoreversible polymer networks enable temporary protective coatings in industry‐relevant applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolymersAcrylatesPrintingSurface PropertiesPhotochemical ProcessesLightPolymerization

Stichwörter der Autor:innen

adhesioncoatingsphotoreversible polymersprinting

Substanzen

PolymersAcrylates

Autor:innen und Institutionen

  • Macromolecular Engineering Laboratory, ETH Zurich, Zürich, Switzerland.
  • Laboratory for Processing of Advanced Composites (LPAC), École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland.
  • Laboratory For Functional Polymers, Swiss Federal Laboratories for Materials Science and Technology (Empa), Switzerland.

ORCID-Profile: Morris Wolf, Alper Balkan, René Schneider, Stefan Mommer, Yves Leterrier, Mark W Tibbitt

Zitieren

APA

Wolf, M., Balkan, A., Schneider, R., Mommer, S., Leterrier, Y., & Tibbitt, M. W. (2026). Digital Printing of Photoreversible Protective Films. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.70408

Vancouver

Wolf M, Balkan A, Schneider R, Mommer S, Leterrier Y, Tibbitt MW. Digital Printing of Photoreversible Protective Films. Macromolecular Rapid Communications. 2026. doi:10.1002/marc.70408

BibTeX
@article{Wolf2026,
  author = {Wolf, Morris and Balkan, Alper and Schneider, René and Mommer, Stefan and Leterrier, Yves and Tibbitt, Mark W},
  title = {Digital Printing of Photoreversible Protective Films},
  journal = {Macromolecular Rapid Communications},
  year = {2026},
  doi = {10.1002/marc.70408}
}
Kostenlos starten →