EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Hierarchically Porous Coatings for Cellulose Fibers by Core–Shell Particle Templating

Regina Leiner, Derya Kurt, Sebastian Heinz, Volker Presser, Bizan N Balzer, Markus Gallei

Macromolecular Rapid Communications · 2026-07 · 47 (13)

DOI: 10.1002/marc.70293 ↗

At a glance

Journal article in Macromolecular Rapid Communications, published online on 2026-04-27. Written by Regina Leiner and 5 co-authors. Institution: Polymer Chemistry, Saarland University, Saarbrücken, Germany. Major MEDLINE topics: Cellulose. Cited 1 times so far (Crossref); 38 references. The full text is freely available (open access, CC BY 4.0). Funded by: Saarland Ministry of Finance and Science.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Porous and functional cellulose‐based materials play a key role in the field of novel sensors and membrane technologies, yet their full potential remains unexplored. This article elaborates on a procedure for creating porous coatings with reactive chemical groups on their surfaces by covering a cellulose membrane with hybrid core–shell particles. The silica cores of these particles, synthesized via the Stöber procedure, could easily be etched with hydrofluoric acid. The cross‐linked polymer shell of the particles was synthesized via emulsion polymerization. These particles were analyzed via dynamic light scattering and transmission electron microscopy. After coating the cellulose and an etching process, the former core particles formed pores within the matrix of the shell polymer, as observed via scanning electron microscopy and atomic force microscopy. The coated area also featured chemical functionalities via appropriate polymers used in the shell of the particles, enabling further cellulose modification. In particular, hydroxy groups were incorporated into a copolymer containing 2‐hydroxyethyl methacrylate, and epoxy groups were incorporated using glycidyl methacrylate. These functionalities can be combined to yield a wide range of specific properties. For this reason, this work paves the way for advanced smart and stimuli‐responsive porous filtration systems, paper‐based sensors, and adsorbers.

Subjects

MeSH terms (MEDLINE)

CellulosePorositySurface PropertiesParticle SizePolymersSilicon DioxideMethacrylates

Author keywords

cellulosecore–shellfilterporous coatings

Substances

CellulosePolymersSilicon DioxideMethacrylateshydroxyethyl methacrylate

Authors and institutions

  • Polymer Chemistry, Saarland University, Saarbrücken, Germany.
  • INM - Institute for New Materials, Saarland University, Saarbrücken, Germany.
  • Department of Materials Science and Engineering, Saarland University, Saarbrücken, Germany.
  • Saarene, Saarland Center for Energy Materials and Sustainability, Saarland University, Saarbrücken, Germany.
  • Institute of Physical Chemistry, University of Freiburg, Freiburg, Germany.
  • Freiburg Materials Research Center (FMF), University of Freiburg, Freiburg, Germany.

Funding

  • Saarland Ministry of Finance and Science

Cite

APA

Leiner, R., Kurt, D., Heinz, S., Presser, V., Balzer, B. N., & Gallei, M. (2026). Hierarchically Porous Coatings for Cellulose Fibers by Core–Shell Particle Templating. Macromolecular Rapid Communications, 47(13). https://doi.org/10.1002/marc.70293

Vancouver

Leiner R, Kurt D, Heinz S, Presser V, Balzer BN, Gallei M. Hierarchically Porous Coatings for Cellulose Fibers by Core–Shell Particle Templating. Macromolecular Rapid Communications. 2026;47(13). doi:10.1002/marc.70293

BibTeX
@article{Leiner2026,
  author = {Leiner, Regina and Kurt, Derya and Heinz, Sebastian and Presser, Volker and Balzer, Bizan N and Gallei, Markus},
  title = {Hierarchically Porous Coatings for Cellulose Fibers by Core–Shell Particle Templating},
  journal = {Macromolecular Rapid Communications},
  year = {2026},
  volume = {47},
  number = {13},
  doi = {10.1002/marc.70293}
}
Start for free →