A Sustainable Free‐Standing Triboelectric Nanogenerator Made of Flexible Composite Film for Brake Pattern Recognition in Automobiles
Macromolecular Rapid Communications · 2024
DOI: 10.1002/marc.202400431 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2024. Verfasst von Nayoon Kim und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Robotics and Mechatronics Engineering, Daegu Gyeongbuk Institute of Science and Technology, Daegu, 42988, Republic of Korea. Hauptthemen laut MEDLINE: Electric Power Supplies, Automobiles. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Research Foundation of Korea, Ministry of Science & ICT, Korea, Royal Society of Chemistry for the Researcher Grant.
Abstract (Originalsprache)
In recent years, the automotive industry has made significant progress in integrating multifunctional sensors to improve vehicle performance, safety, and efficiency. As the number of integrated sensors keeps increasing, there is a growing interest in alternative energy sources. Specifically, self‐powered sensor systems based on energy harvesting are drawing much attention, with a main focus on sustainability and reducing reliance on typical batteries. This paper demonstrates the use of triboelectric nanogenerators (TENGs) in a computer mouse for efficient energy harvesting and in automobile braking systems for safety applications using SrBi 2 Ta 2 O 9 (SBTO) perovskite, blended PDMS composite operating in free‐standing mode with an interdigitated patterned aluminum electrode. This self‐powered sensor is capable of distinguishing between normal and abnormal braking patterns using digital signal processing techniques. It is noteworthy that the addition of 15% wt. of the SBTO in PDMS composite‐based TENG delivered 13.5 V, 45 nA, and an output power of 0.98 µW. This new combination of energy harvesting and safety applications enables real‐time monitoring and predictive maintenance in the automotive industry.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Robotics and Mechatronics Engineering, Daegu Gyeongbuk Institute of Science and Technology, Daegu, 42988, Republic of Korea.
- Center for Flexible Electronics, Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Andhra Pradesh, 522302, India.
- Department of Electrical Engineering, Siksha O Anusandhan University, Bhubaneswar, 751030, India.
- Department of Chemistry, Siksha O Anusandhan University, Bhubaneswar, 751030, India.
ORCID-Profile: Sugato Hajra
Förderung
- National Research Foundation of Korea
- Ministry of Science & ICT, Korea
- Royal Society of Chemistry for the Researcher Grant
- DGIST Undergraduate Group Research Program (UGRP)
Zitieren
APA
Kim, N., Hwang, S., Panda, S., Hajra, S., Jo, J., Song, H., Belal, M. A., Vivekananthan, V., Panigrahi, B. K., Achary, P. G. R., & Kim, H. J. (2024). A Sustainable Free‐Standing Triboelectric Nanogenerator Made of Flexible Composite Film for Brake Pattern Recognition in Automobiles. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202400431
Vancouver
Kim N, Hwang S, Panda S, Hajra S, Jo J, Song H, et al. A Sustainable Free‐Standing Triboelectric Nanogenerator Made of Flexible Composite Film for Brake Pattern Recognition in Automobiles. Macromolecular Rapid Communications. 2024. doi:10.1002/marc.202400431
BibTeX
@article{Kim2024,
author = {Kim, Nayoon and Hwang, Subhin and Panda, Swati and Hajra, Sugato and Jo, Junghun and Song, Heewon and Belal, Mohamed A and Vivekananthan, Venkateswaran and Panigrahi, Basanta Kumar and Achary, P Ganga Raju and Kim, Hoe Joon},
title = {A Sustainable Free‐Standing Triboelectric Nanogenerator Made of Flexible Composite Film for Brake Pattern Recognition in Automobiles},
journal = {Macromolecular Rapid Communications},
year = {2024},
doi = {10.1002/marc.202400431}
}
EUVIMED