EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermo‐Mechanical and Structural Characterization of Isothermally Annealed 3D Printed Pseudo‐Amorphous Polyetherketoneketone (PEKK).

Dilesh Raj Shrestha, Xiaolong Wang, Nazanin Emami

Macromolecular Materials and Engineering · 2025-08 · 310 (8)

DOI: 10.1002/mame.202500076 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 10.04.2025. Verfasst von Dilesh Raj Shrestha und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 Marie Skłodowska-Curie Actions.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyetherketoneketone (PEKK) (60/40 TERE/ISO) is characterized by a lower processing temperature and a higher glass transition temperature (T g ) compared to polyetheretherketone (PEEK), making it a promising material for 3D printing. However, it remains in amorphous state post‐printing due to its slow crystallization rate. In this study, isothermal annealing is conducted on 3D printed pseudo amorphous PEKK at various times and temperature. Thermal analysis techniques reveal that both annealing time and temperature play a pivotal role in enhancing crystallinity, with levels reaching up to 27% when annealed between the T g and the melting temperature (T m ). However, thermal stability decreased as the annealing temperature approached T m . X‐ray diffraction studies demonstrate that annealing between T g and T m promotes the development of stable form II crystals, while annealing at higher temperatures encourages the formation of form I crystals. Furthermore, dynamic mechanical analysis indicated a 44% increase in mechanical stiffness following annealing, and compressive testing shows improved yield strength, comparable to that of other polyaryletherketone (PAEK) materials. These findings suggest that controlled annealing of 3D printed PEKK enables precise tailoring of its crystallinity and mechanical properties, making it adaptable for a wide range of applications, such as biomedical devices that require patient‐specific customization.

Förderung

  • H2020 Marie Skłodowska-Curie Actions

Zitieren

APA

Shrestha, D. R., Wang, X., & Emami, N. (2025). Thermo‐Mechanical and Structural Characterization of Isothermally Annealed 3D Printed Pseudo‐Amorphous Polyetherketoneketone (PEKK). Macromolecular Materials and Engineering, 310(8). https://doi.org/10.1002/mame.202500076

Vancouver

Shrestha DR, Wang X, Emami N. Thermo‐Mechanical and Structural Characterization of Isothermally Annealed 3D Printed Pseudo‐Amorphous Polyetherketoneketone (PEKK). Macromolecular Materials and Engineering. 2025;310(8). doi:10.1002/mame.202500076

BibTeX
@article{Shrestha2025,
  author = {Shrestha, Dilesh Raj and Wang, Xiaolong and Emami, Nazanin},
  title = {Thermo‐Mechanical and Structural Characterization of Isothermally Annealed 3D Printed Pseudo‐Amorphous Polyetherketoneketone (PEKK)},
  journal = {Macromolecular Materials and Engineering},
  year = {2025},
  volume = {310},
  number = {8},
  doi = {10.1002/mame.202500076}
}
Kostenlos starten →