EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

4D Printing‐Encapsulated Polycaprolactone–Thermoplastic Polyurethane with High Shape Memory Performances

Davood Rahmatabadi, Mohammad Aberoumand, Kianoosh Soltanmohammadi, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani

Advanced Engineering Materials · 2023-03 · 25 (6)

DOI: 10.1002/adem.202201309 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 22.11.2022. Verfasst von Davood Rahmatabadi und 8 weiteren Autor:innen. Die Arbeit wurde bisher 107-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

There are a few shape memory polymers (SMPs) like polylactic acid (PLA) and polyurethane (PU) that are 4D printable, and other SMPs must be synthesized with a complicated chemical lab effort. Herein, considering dual‐material extrusion printing and microscopic mechanism behind shape memory effect (SME), bilayer‐encapsulated polycaprolactone (PCL)–thermoplastic polyurethane (TPU) shape memory composite structures are 4D printed for the first time. The SME performance is investigated by assessing fixity, shape recovery, stress recovery, and stress relaxation under bending and compression loading modes. PCL, TPU, and melting temperature of PCL play the role of switching phase, net point, and transition temperature, respectively. Due to the destruction and dripping of molten PCL in contact with water, PCL is encapsulated by TPU. Encapsulation successfully solves the challenge of bonding/interface between printed layers, and the results show that the SME performance of the encapsulated structures is higher than bilayer PCL–TPU one's. Experiments reveal that maximum stress recovery in 4D‐printed composites remains constant over time. This is a great achievement compared to the previous extrusion‐based SMP structures that have great weakness in stress relaxation due to weak and low crystalline fractions and the unraveling of molecular entanglements in semicrystalline and amorphous thermoplastic SMPs, respectively.

Zitieren

APA

Rahmatabadi, D., Aberoumand, M., Soltanmohammadi, K., Soleyman, E., Ghasemi, I., Baniassadi, M., Abrinia, K., Bodaghi, M., & Baghani, M. (2023). 4D Printing‐Encapsulated Polycaprolactone–Thermoplastic Polyurethane with High Shape Memory Performances. Advanced Engineering Materials, 25(6). https://doi.org/10.1002/adem.202201309

Vancouver

Rahmatabadi D, Aberoumand M, Soltanmohammadi K, Soleyman E, Ghasemi I, Baniassadi M, et al. 4D Printing‐Encapsulated Polycaprolactone–Thermoplastic Polyurethane with High Shape Memory Performances. Advanced Engineering Materials. 2023;25(6). doi:10.1002/adem.202201309

BibTeX
@article{Rahmatabadi2023,
  author = {Rahmatabadi, Davood and Aberoumand, Mohammad and Soltanmohammadi, Kianoosh and Soleyman, Elyas and Ghasemi, Ismaeil and Baniassadi, Majid and Abrinia, Karen and Bodaghi, Mahdi and Baghani, Mostafa},
  title = {4D Printing‐Encapsulated Polycaprolactone–Thermoplastic Polyurethane with High Shape Memory Performances},
  journal = {Advanced Engineering Materials},
  year = {2023},
  volume = {25},
  number = {6},
  doi = {10.1002/adem.202201309}
}
Kostenlos starten →