EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Recycled PET Packaging Materials of Improved Toughness— Importance of Devitrification of the Rigid Amorphous Fraction

Ferenc Ronkay, Dániel Gere, Emese Slezák, Edina Szabó, György Marosi, Katalin Bocz

Macromolecular Materials and Engineering · 2025-02 · 310 (2)

DOI: 10.1002/mame.202400219 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 04.12.2024. Verfasst von Ferenc Ronkay und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Magyar Tudományos Akadémia, Hungarian Scientific Research Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Degradation, a common problem faced during the processing of recycled poly(ethylene terephthalate) (PET), leads to significant embrittlement of the products, as a result of which the material loses its applicability. Increased crystallization rate of the short chains of recycled PET and obstructed mobility of the amorphous phase are the main causes of enhanced brittleness. In this research, a straightforward method is proposed for improving the toughness of recycled PET products, namely the devitrification of the rigid amorphous phase by thermal annealing, which results in enhanced molecular mobility in the amorphous fraction, thereby promoting ductile deformation. The effects of thermal annealing conditions are comprehensively evaluated on the microstructure and macroscopic properties, i.e., impact resistance, of recycled PET films. The perforation energy value of the recycled PET film is found to increase to its threefold, reaching a value higher than 18 J mm −1 , as a result of 10 s thermal treatment at 120 °C. Differential scanning calorimetry, dynamic mechanical analyses, and thermally stimulated depolarization current measurements provide evidence for the devitrification of the rigid amorphous fraction under these conditions, which is the key to efficient enhancement in toughness.

Förderung

  • Magyar Tudományos Akadémia
  • Hungarian Scientific Research Fund

Zitieren

APA

Ronkay, F., Gere, D., Slezák, E., Szabó, E., Marosi, G., & Bocz, K. (2025). Recycled PET Packaging Materials of Improved Toughness— Importance of Devitrification of the Rigid Amorphous Fraction. Macromolecular Materials and Engineering, 310(2). https://doi.org/10.1002/mame.202400219

Vancouver

Ronkay F, Gere D, Slezák E, Szabó E, Marosi G, Bocz K. Recycled PET Packaging Materials of Improved Toughness— Importance of Devitrification of the Rigid Amorphous Fraction. Macromolecular Materials and Engineering. 2025;310(2). doi:10.1002/mame.202400219

BibTeX
@article{Ronkay2025,
  author = {Ronkay, Ferenc and Gere, Dániel and Slezák, Emese and Szabó, Edina and Marosi, György and Bocz, Katalin},
  title = {Recycled PET Packaging Materials of Improved Toughness— Importance of Devitrification of the Rigid Amorphous Fraction},
  journal = {Macromolecular Materials and Engineering},
  year = {2025},
  volume = {310},
  number = {2},
  doi = {10.1002/mame.202400219}
}
Kostenlos starten →