EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Post-Consumer Recycled PET: A Comprehensive Review of Food and Beverage Packaging Safety in Brazil

Carolina Soares Marcelino, Vitor Emanuel de Souza Gomes, Luís Marangoni Júnior

Polymers · 24.02.2025 · 17 (5) · 594

DOI: 10.3390/polym17050594 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 24.02.2025. Verfasst von Carolina Soares Marcelino und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Food Engineering and Technology, School of Food Engineering (FEA), State University of Campinas (UNICAMP), Campinas 13083-862, Brazil. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: São Paulo Research Foundation (FAPESP) within the scope of the Center for Science and Development of Solutions for Post-Consumer Waste, Coordination for the Improvement of Higher Education Personnel—Brazil (CAPES).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyethylene terephthalate (PET) is widely used in the food and beverage packaging sector due to its chemical and mechanical properties. Although PET is a fossil-based polymer, its recyclability significantly contributes to reducing the environmental impacts caused by excessive plastic consumption. However, the growing demand for post-consumer recycled PET (PET-PCR) food packaging has raised concerns about the efficiency of decontamination processes involved in recycling this material. This review initially addresses PET synthesis processes, highlighting injection stretch blow molding as the predominant technique for packaging production. It then discusses reverse logistics as a strategy to promote sustainability through the recovery of post-consumer packaging, such as plastic bottles. This review examines mechanical and chemical recycling methods used in PET-PCR production, food safety requirements including positive lists of permitted substances, contaminant migration limits, non-intentionally added substances (NIASs), and updated criteria for the National Health Surveillance Agency (ANVISA) of food-grade PET-PCR resins. Finally, the review explores future prospects for using PET-PCR in the food and beverage packaging sector, assessing its environmental impacts and potential technological advancements to enhance its sustainability and safety.

Schlagwörter

Stichwörter der Autor:innen

PET bottlescircular economycontaminantsnon-intentionally added substancespolymeric packaging

Autor:innen und Institutionen

  • Department of Food Engineering and Technology, School of Food Engineering (FEA), State University of Campinas (UNICAMP), Campinas 13083-862, Brazil.

Förderung

  • São Paulo Research Foundation (FAPESP) within the scope of the Center for Science and Development of Solutions for Post-Consumer Waste
  • Coordination for the Improvement of Higher Education Personnel—Brazil (CAPES)

Zitieren

APA

Marcelino, C. S., Gomes, V. E. S., & Marangoni Júnior, L. (2025). Post-Consumer Recycled PET: A Comprehensive Review of Food and Beverage Packaging Safety in Brazil. Polymers, 17(5), 594. https://doi.org/10.3390/polym17050594

Vancouver

Marcelino CS, Gomes VES, Marangoni Júnior L. Post-Consumer Recycled PET: A Comprehensive Review of Food and Beverage Packaging Safety in Brazil. Polymers. 2025;17(5):594. doi:10.3390/polym17050594

BibTeX
@article{Marcelino2025,
  author = {Marcelino, Carolina Soares and Gomes, Vitor Emanuel de Souza and Marangoni Júnior, Luís},
  title = {Post-Consumer Recycled PET: A Comprehensive Review of Food and Beverage Packaging Safety in Brazil},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {5},
  pages = {594},
  doi = {10.3390/polym17050594}
}
Kostenlos starten →