High Porosity Poly(ether ketone ketone): Influence of Solvents on Foam Properties
Macromolecular Materials and Engineering · 2023-06 · 308 (6)
DOI: 10.1002/mame.202200704 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 26.04.2023. Verfasst von Dmitrii Rusakov und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Science Fund.
Abstract (Originalsprache)
Poly(ether ketone ketone) (PEKK) is a semicrystalline high‐performance polymer with exceptional mechanical properties, high continuous operation temperature, and is insoluble in most common solvents. Porous PEKK, desired for biomedical applications, is produced by a high‐temperature thermally induced phase separation process using PEKK solutions in two high boiling aprotic solvents, 4‐phenylphenol and 9‐fluorenone, with concentrations up to 20 wt.%. It is demonstrated that the solvent choice has a pronounced influence on the phase separation behavior, which determines the foam morphology, physical and mechanical properties of PEKK foams. Porous PEKK with porosities ranging from 70% to 90%, specific surface areas up to 194 m 2 g −1 and elastic moduli ranging from 35 to 100 MPa are produced.
Förderung
- Austrian Science Fund
Zitieren
APA
Rusakov, D., Menner, A., & Bismarck, A. (2023). High Porosity Poly(ether ketone ketone): Influence of Solvents on Foam Properties. Macromolecular Materials and Engineering, 308(6). https://doi.org/10.1002/mame.202200704
Vancouver
Rusakov D, Menner A, Bismarck A. High Porosity Poly(ether ketone ketone): Influence of Solvents on Foam Properties. Macromolecular Materials and Engineering. 2023;308(6). doi:10.1002/mame.202200704
BibTeX
@article{Rusakov2023,
author = {Rusakov, Dmitrii and Menner, Angelika and Bismarck, Alexander},
title = {High Porosity Poly(ether ketone ketone): Influence of Solvents on Foam Properties},
journal = {Macromolecular Materials and Engineering},
year = {2023},
volume = {308},
number = {6},
doi = {10.1002/mame.202200704}
}
EUVIMED