EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Strain Rate on Hydrogen Embrittlement of Ti6Al4V Alloy

Tien-Dung Nguyen iD, Nooruddin Ansari, Keun Hyung Lee, Dong-Hyun Lee, Jun Hyun Han, Soo Yeol Lee

Materials · 28.02.2024 · 17 (5) · 1100

DOI: 10.3390/ma17051100 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.02.2024. Verfasst von Tien-Dung Nguyen und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Chungnam National University, Daejeon 34134, Republic of Korea. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Institute for Advancement of Technology, National Research Foundation (NRF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The phenomenon of hydrogen embrittlement (HE) in metals and alloys, which determines the performance of components in hydrogen environments, has recently been drawing considerable attention. This study explores the interplay between strain rates and solute hydrogen in inducing HE of Ti6Al4V alloy. For the hydrogen-charged sample, as the strain rate was decreased from 10−2/s to 10−5/s, the ductility decreased significantly, but the HE effect on mechanical strength was negligible. The low strain rate (LSR) conditions facilitated the development of high-angle grain boundaries, providing more pathways for hydrogen diffusion and accumulation. The presence of solute hydrogen intensified the formation of nano/micro-voids and intergranular cracking tendencies, with micro-crack occurrences observed exclusively in the LSR conditions. These factors expanded the brittle hydrogen-damaged region more deeply into the interior of the lattice. This, in turn, accelerated both crack initiation and intergranular crack propagation, finally resulting in a considerable HE effect and a reduction in ductility at the LSR. The current study underscores the influence of strain rate on HE, enhancing the predictability of longevity and improving the reliability of components operating in hydrogen-rich environments under various loading conditions.

Schlagwörter

Stichwörter der Autor:innen

Ti6Al4V alloyhydrogen embrittlementsolute hydrogenstrain rate

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Chungnam National University, Daejeon 34134, Republic of Korea.

ORCID-Profile: Tien-Dung Nguyen

Förderung

  • National Research Foundation of Korea
  • Korea Institute for Advancement of Technology
  • National Research Foundation (NRF)

Zitieren

APA

Nguyen, T. D., Ansari, N., Lee, K. H., Lee, D. H., Han, J. H., & Lee, S. Y. (2024). Effect of Strain Rate on Hydrogen Embrittlement of Ti6Al4V Alloy. Materials, 17(5), 1100. https://doi.org/10.3390/ma17051100

Vancouver

Nguyen TD, Ansari N, Lee KH, Lee DH, Han JH, Lee SY. Effect of Strain Rate on Hydrogen Embrittlement of Ti6Al4V Alloy. Materials. 2024;17(5):1100. doi:10.3390/ma17051100

BibTeX
@article{Nguyen2024,
  author = {Nguyen, Tien-Dung and Ansari, Nooruddin and Lee, Keun Hyung and Lee, Dong-Hyun and Han, Jun Hyun and Lee, Soo Yeol},
  title = {Effect of Strain Rate on Hydrogen Embrittlement of Ti6Al4V Alloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {5},
  pages = {1100},
  doi = {10.3390/ma17051100}
}
Kostenlos starten →