A Porous Gelatin Methacrylate‐Based Material for 3D Cell‐Laden Constructs
Macromolecular Bioscience · 2023-02 · 23 (2)
DOI: 10.1002/mabi.202200357 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Bioscience, online erschienen am 11.11.2022. Verfasst von Lorenzo Bova und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering (DII), University of Padua, Via Marzolo 9, Padova, 35131, Italy. Hauptthemen laut MEDLINE: Gelatin, Bioprinting. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: European Research Council.
Abstract (Originalsprache)
3D constructs are fundamental in tissue engineering and cancer modeling, generating a demand for tailored materials creating a suitable cell culture microenvironment and amenable to be bioprinted. Gelatin methacrylate (GelMA) is a well‐known functionalized natural polymer with good printability and binding motifs allowing cell adhesion; however, its tight micropores induce encapsulated cells to retain a non‐physiological spherical shape. To overcome this problem, blended GelMa is here blended with Pluronic F‐127 (PLU) to modify the hydrogel internal porosity by inducing the formation of larger mesoscale pores. The change in porosity also leads to increased swelling and a slight decrease in Young's modulus. All blends form stable hydrogels both when cast in annular molds and bioprinted in complex structures. Embedded cells maintain high viability, and while Neuroblastoma cancer cells typically aggregate inside the mesoscale pores, Mesenchymal Stem Cells stretch in all three dimensions, forming cell–cell and cell–ECM interactions. The results of this work prove that the combination of tailored porous materials with bioprinting techniques enables to control both the micro and macro architecture of cell‐laden constructs, a fundamental aspect for the development of clinically relevant in vitro constructs.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Industrial Engineering (DII), University of Padua, Via Marzolo 9, Padova, 35131, Italy.
- Fondazione Istituto di Ricerca Pediatrica Città della Speranza (IRP), Corso Stati Uniti 4, Padova, 35127, Italy.
ORCID-Profile: Elisa Cimetta
Förderung
- European Research Council
Zitieren
APA
Bova, L., Maggiotto, F., Micheli, S., Giomo, M., Sgarbossa, P., Gagliano, O., Falcone, D., & Cimetta, E. (2023). A Porous Gelatin Methacrylate‐Based Material for 3D Cell‐Laden Constructs. Macromolecular Bioscience, 23(2). https://doi.org/10.1002/mabi.202200357
Vancouver
Bova L, Maggiotto F, Micheli S, Giomo M, Sgarbossa P, Gagliano O, et al. A Porous Gelatin Methacrylate‐Based Material for 3D Cell‐Laden Constructs. Macromolecular Bioscience. 2023;23(2). doi:10.1002/mabi.202200357
BibTeX
@article{Bova2023,
author = {Bova, Lorenzo and Maggiotto, Federico and Micheli, Sara and Giomo, Monica and Sgarbossa, Paolo and Gagliano, Onelia and Falcone, Dario and Cimetta, Elisa},
title = {A Porous Gelatin Methacrylate‐Based Material for 3D Cell‐Laden Constructs},
journal = {Macromolecular Bioscience},
year = {2023},
volume = {23},
number = {2},
doi = {10.1002/mabi.202200357}
}
EUVIMED