EUVIMEDEUVIMED entdecken
Crossref

Sonochemical Degradation of Gelatin Methacryloyl to Control Viscoelasticity for Inkjet Bioprinting

Yunji Lee iD, Ju An Park iD, Tri Tuladhar, Sungjune Jung iD

Macromolecular Bioscience · 2023

DOI: 10.1002/mabi.202200509 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Bioscience, 2023. Verfasst von Yunji Lee und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-ro, Nam-gu, Pohang-si, Gyeongsang…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Bioprinting. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 35 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inkjet printing enables the mimicry of the microenvironment of natural complex tissues by patterning cells and hydrogels at a high resolution. However, the polymer content of an inkjet‐printable bioink is limited as it leads to strong viscoelasticity in the inkjet nozzle. Here it is demonstrated that sonochemical treatment controls the viscoelasticity of a gelatin methacryloyl (GelMA) based bioink by shortening the length of polymer chains without causing chemical destruction of the methacryloyl groups. The rheological properties of treated GelMA inks are evaluated by a piezo‐axial vibrator over a wide range of frequencies between 10 and 10 000 Hz. This approach enables to effectively increase the maximum printable polymer concentration from 3% to 10%. Then it is studied how the sonochemical treatment effectively controls the microstructure and mechanical properties of GelMA hydrogel constructs after crosslinking while maintaining its fluid properties within the printable range. The control of mechanical properties of GelMA hydrogels can lead fibroblasts more spreading on the hydrogels. A 3D cell‐laden multilayered hydrogel constructs containing layers with different physical properties is fabrictated by using high‐resolution inkjet printing. The sonochemical treatment delivers a new path to inkjet bioprinting to build microarchitectures with various physical properties by expanding the range of applicable bioinks.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalBioprintingHydrogelsGelatinMethacrylatesTissue EngineeringTissue Scaffolds

Stichwörter der Autor:innen

Gelatin methacryloyl (GelMA)biopolymerink rheologypiezo-axial vibrator (PAV)tissue engineering

Substanzen

gelatin methacryloylHydrogelsGelatinMethacrylates

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-ro, Nam-gu, Pohang-si, Gyeongsangbuk-do, 37673, Republic of Korea.
  • Department of Chemical Engineering and Biotechnology, University of Cambridge, Philippa Fawcett Drive, Cambridge, CB3 0AS, UK.
  • TriJet Limited, 59 Eland Way, Cambridge, CB1 9XQ, UK.

ORCID-Profile: Yunji Lee, Ju An Park, Sungjune Jung

Zitieren

APA

Lee, Y., Park, J. A., Tuladhar, T., & Jung, S. (2023). Sonochemical Degradation of Gelatin Methacryloyl to Control Viscoelasticity for Inkjet Bioprinting. Macromolecular Bioscience. https://doi.org/10.1002/mabi.202200509

Vancouver

Lee Y, Park JA, Tuladhar T, Jung S. Sonochemical Degradation of Gelatin Methacryloyl to Control Viscoelasticity for Inkjet Bioprinting. Macromolecular Bioscience. 2023. doi:10.1002/mabi.202200509

BibTeX
@article{Lee2023,
  author = {Lee, Yunji and Park, Ju An and Tuladhar, Tri and Jung, Sungjune},
  title = {Sonochemical Degradation of Gelatin Methacryloyl to Control Viscoelasticity for Inkjet Bioprinting},
  journal = {Macromolecular Bioscience},
  year = {2023},
  doi = {10.1002/mabi.202200509}
}
Kostenlos starten →